Mechanical properties response of extruded 6063 aluminum alloy at varied die entry angle has been investigated. Plain carbon and tool steel dies with entry angles of 15, 30, 45, 60, 75 and 90 were simulated. Extrusion on the alloy was done at ambient temperature (37C) and the extruded samples from the various angles were subjected to selected service related mechanical tests and microstructural...

Exposure tests were performed on low alloy steels in high Cl- and high SOx environment, and the structure of the rust were analyzed by TEM (Transmission Electron Microscopy) and Raman Spectroscopy. In the exposure test site, the concentrations of Cl- and SOx were found to be high, which caused the corrosion of the steels. The conventional weathering steel (SMA: 0.6% Cr-0.4% Cu-Fe) showed higher...

Reindeer antler was studied for its possible use as a bone implant material. A molecular biological study showed that antler contains a growth factor promoting bone formation. Ectopic bone formation assay showed that antler is not an equally effective inducer as allogenic material. Ectopic bone formation assay was optimised for biocompatibility studies of orthopaedic NiTi implants. Ti-6Al-4V an...

t is known that the protective value of zinc is partially a result of its ability to form a protective film when plated on a base metal, such as steel. The zinc is sacrificial and corrodes I preferentially to protectthe steel. Although pure zinc coating provides some degree of protection for the substrate, in a severe corrosion environment, zinc is consumed rapidly. For this reason, it is usual...

in the present study, the microstructure and mechanical properties of the dissimilar welding betweenastm a335 low alloy steel and er309l austenitic stainless steel were investigated using the gastungsten arc welding process. the welding of dissimilar materials between astm a335 low alloy steeland er309l austenitic stainless steel was found to have a significant effect on the microstructure when...

In the present investigation, H13 tool steel has been deposited on copper alloy substrate using both CO2 and diode laser. A detailed parametric analysis has been carried out in order to find out optimum processing zone for coating defect free H13 tool steel on copper alloy substrate. Followed by parametric optimization, the microstructure and microhardness of the deposited clads have been evalu...

The fatigue strength, effects of a notch on the fatigue strength, and fatigue crack growth rate of Ti-15Zr-4Nb-4Ta alloy were compared with those of other implantable metals. Zr, Nb, and Ta are important alloying elements for Ti alloys for attaining superior long-term corrosion resistance and biocompatibility. The highly biocompatible Ti-15Zr-4Nb-4Ta alloy exhibited an excellent balance between...

A method is presented to use a dimensionless form of the well-known Niyama criterion to directly predict the amount of shrinkage porosity that forms during solidification of metal alloy castings. The main advancement offered by this method is that it avoids the need to know the threshold Niyama value below which shrinkage porosity forms; such threshold values are generally unknown and alloy dep...

Formability of automotive friction stir welded TWB (tailor welded blank) sheets isnumerically investigated in biaxial stretching based on hemispherical dome stretch (HDS) test infour automotive sheets of Aluminum alloy 6111-T4, 5083-H18, 5083-O and DP590 steel, havingdifferent thicknesses. The effects of the weld zone modeling and the thickness ratio on formabilityare evaluated. In order to car...