Asphalt concrete pavements have a short life cycle, failing mainly due to temperature changes, traffic loading and ageing. Modified asphalt mixtures provide the technology to produce a bituminous binder with improved viscoelastic properties, which remain in balance over a wider temperature range and loading conditions. In this research, 60/70 penetration grade asphalt binder was modified by add...

Composite pins of rubber dust collected from tyre retreading centres of trucks, cars and buses etc.and epoxy with weight percentages of 10. 15, and 20 % of rubber (weight fractions of 9, 13 and 17 % respectively) have been prepared in house with the help of a split wooden mould. The pins were tested in a pin-on-disc wear monitor to determine the co-efficient of friction and weight losses with v...

Ceramic insulators are widely used in transmission as well as in distribution lines. As outdoor insulators, the ceramic insulators are subjected to environmental stresses. In particular case, the insulators may severe high pollution exposure. Under the polluted condition, high leakage current will flow on the insulator surface and dry band arching may take place. The phenomena may initiate the ...

Background Rubber tree [Hevea Braziliensis (Willd. ex Adr. de Juss.) Muell-Arg.], a native species of the Amazon Rainforest in South America, belonging to the Euphorbiaceae family, is world’s major source of natural latex. Brazil, despite being the center of origin and diversity of the species and latex main producer at the end of XIX century, nowadays imports around 70% of the rubber consumed ...

Refrigeration effects can be obtained from elastomers classified as “ideal rubber” by operating over a cycle similar to that of the Carnot cycle. The interesting properties of ideal rubber have long been recognized, with most investigations of potential thermodynamic cycles devoted to power cycles. This paper focuses on the development of refrigeration cycles constructed from ideal rubber refri...

A simplified, closed-form version of the basic mechanics of a driven rigid wheel on lowcohesion deformable terrain is presented. This approach allows the formulation of an on-line terrain parameter estimation algorithm, which has important applications for planetary exploration rovers. Analytical comparisons of the original and simplified equations are presented, and are shown to closely agree....

A Rover’s wheel performance is one of the limiting factors in its ability to successfully traverse other planets. More research focusing on wheel materials, design, and optimized tread patterns needs to be conducted so that a rover can reach more of its potential. A wheel test bed is being fabricated to test new wheel designs and to collect data which will be used to map the relationship betwee...

the ability to perform rolling contact fatigue (rcf) experiments in wheel–rail material is provided by a new small–scale test rig, manifesting the actual dynamic behaviour of the railway system. in this paper, a multi-body dynamics (mbd) model is proposed, simulating the vibration behaviour of the prescribed rig. the new testing facility is modelled using a three-dimensional model of the vehicl...

BACKGROUND AND OBJECTIVES Statistical analysis is necessary for adequate evaluation of the original article by the reader allowing him/her to better visualize and comprehend the results. The objective of the present study was to determine the frequency of the adequate use of statistical tests in original articles published in the Revista Brasileira de Anestesiologia from January 2008 to Decembe...

Knowledge of wheel–rail interaction is crucial to wheel and rail maintenance. In this interaction, some of the worn-off material is transformed into airborne particles. Although such wear is well understood, few studies treat the particles generated. We investigated friction modifiers' effects on airborne particles characteristics generated in wheel-rail contacts in laboratory conditions. Pin-o...