Solution blow spinning (SBS) is an innovative process for spinning micro/nanofibers. In this paper, polyamic acid (PAA) nanofibers were fabricated via a SBS apparatus and then imidized into polyimide (PI) nanofibers via thermal process. The morphology and diameter distributions of PAA nanofibers were determined by scanning electron microscope (SEM) and Image Tool software, the processing parame...

In₂O₃/SnO₂ composite hetero-nanofibers were synthesized by an electrospinning technique for detecting indoor volatile organic gases. The physical and chemical properties of In₂O₃/SnO₂ hetero-nanofibers were characterized and analyzed by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), Energy Dispersive X-Ray Spectroscopy (EDX), specific surface Brunauer-Emmett-Tell...

Voriconazole (VRC) incorporated in composited polyvinyl alcohol (PVA)/hydroxypropyl-β-cyclodextrin (HPβCD) blended nanofibers were produced via electrospinning for efficient ophthalmic delivery. The VRC loading capacity increased with increasing HPβCD content. The optimal solution for electrospinning consisted of 8% (w/v) PVA, 4% (w/v) HPβCD and 0.5% (w/v) VRC. The nanofibers exhibited bead-fre...

The failure of prosthesis after total joint replacement is due to the lack of early implant osseointegration. In this study polyvinyl alcohol-collagen-hydroxyapatite (PVA-Col-HA) electrospun nanofibrous meshes were fabricated as a biomimetic bone-like extracellular matrix for the modification of orthopedic prosthetic surfaces. In order to reinforce the PVA nanofibers, HA nanorods and Type I col...

The novel oriented electrospun nanofiber membrane composed of MOFs and SPPESK has been synthesized for proton exchange membrane fuel cell operating at high temperature and anhydrous conditions. It is clear that the oriented nanofiber membrane displays the higher proton conductivity than that of the disordered nanofiber membrane or the membrane prepared by conventional solvent-casting method (wi...

Electrospinning is a very simple and versatile process by which polymer nanofibers with diameters ranging from a few nanometers to several micrometers (usually between 50 and 500 nm) can be produced using an electrostatically driven jet of polymer solution (or polymer melt). Significant progress has been made in this process throughout the past few years and the resultant nanostructures have be...

Objective(S): Electrospinning of chitosan/polyethylene oxide (CS/PEO) nanofibers with the addition of cefazolin to create nanofibers with antimicrobial properties were examined. Methods: Polymeric nanofibers including CS/PEO and CS/PEO /cefazolin, were produced by electrospinning method. The range of nanofiber was 60-100 nm in diameter and measured with I...

polypyrrole (ppy) nanofibers have been fabricated on glassy carbon electrode (gce) usingelectrochemical technique. electropolymerization of pyrrole (py) for the fabrication of ppy nanofiberswas occurred on gce by applying a fixed potential of about 0.85 v for 120 sec in a mild basic solutioncontaining sodium carbonate and sodium perchlorate. in the mild basic media, the monomer, py, isoxidized ...

We describe recent experiments aimed at using carbon nanofibers for biosensing applications. Vertically aligned carbon nanofibers are grown on molybdenum electrodes to provide electrical contact to the nanofibers. Upon exposure to electrolyte solutions, we find that short nanofibers of <1 Am length can be wet and dried without significant mechanical disruption. However, longer fibers are prone ...

Nanoscale wavelength-converted optical components are promising components for communication and optical information processing in integrated photonic system. In this work, we report a facile strategy for realizing continuously tunable wavelength-converted wave-guiding in dye-doped nanofibers. The nanofibers with diameters of 200-800 nm have an absorption coefficient of about 80 cm(-1) and a se...