background: although stabilization ponds and lagoons are suitable treatment processes due to simplicity of operation and low per capital costs, the effluents of these systems have too high of a total suspended solids concentration to be discharged into receiving waters. this problem is mainly caused by algae. in this study, an electro-coagulation reactor was examined to re­move algae from the f...

groundwater makes up an important part of global freshwater resources, though it is often threatened by overuse of natural resources along with abundant production of wastes in modern society. this study aims to investigate the removal of three heavy metals including nickel, cadmium, and lead from groundwater via electrocoagulation, a suitable method for treatment of water-soluble compounds, de...

a general overview on the prospective of various oxidation and combined processes in the treatment of tannery industry effluent are reported. various oxidation and combined processes such as uv/h2o2/hypochlorites, fenton and electro-oxidation, photo-chemical, photo-catalytic, electro-catalytic oxidation, wet air oxidation, ozonation, biological followed by ozone/uv/ h2o2, coagulation or ele...

BACKGROUND Bipolar electro-coagulation has a reported efficacy in treating epilepsy involving functional cortex by pure electro-coagulation or combination with resection. However, the mechanisms of bipolar electro-coagulation are not completely known. We studied the acute cortical blood flow and histological changes after bipolar electro-coagulation in 24 patients with intractable temporal lobe...

in this study, the performance of electro-coagulation in combination with aluminum sacrificial anode, in removal of zinc and copper has been investigated. several parameters, such as pollutant concentration, ph, electrical potential, cod, turbidity and contact time were studied to achieve a higher removal capacity. variable concentrations (5-50-500 ppm) of zinc and copper solutions were prepare...

in this study, removal of methylene blue by electro-coagulation method using aluminum and iron electrodes was investigated. the influence of the operating parameters such as contact time, current density, anode type, inter-electrodes distance, initial and final ph and energy consumption rate was determined. dye removal was increased with increases in solution ph, current density and contact tim...

A general overview on the prospective of various oxidation and combined processes in the treatment of tannery industry effluent are reported. Various oxidation and combined processes such as UV/H2O2/Hypochlorites, Fenton and Electro-oxidation, photo-chemical, photo-catalytic, electro-catalytic oxidation, wet air oxidation, ozonation, biological followed by ozone/UV/ H2O2, coagulation or electro...

The goal of this experiment is to evaluate the effectiveness of different leachate pre-treatment options in terms of COD and ammonia removal. This research focused on the evaluation of physical-chemical methods for pre-treatment of leachate that would be effective and rapid in order to satisfy the requirements of the sewer discharge by-laws. The four pre-treatment options evaluated were: air st...

Groundwater makes up an important part of global freshwater resources, though it is often threatened by overuse of natural resources along with abundant production of wastes in modern society. This study aims to investigate the removal of three heavy metals including nickel, cadmium, and lead from groundwater via electrocoagulation, a suitable method for treatment of water-soluble compounds, de...