To carry out the investigation, a cylinder pressure model was developed based on the position of the crankshaft, engine load, engine speed, and fuel injection time. This model takes into account the maximum number of parameters involved. The accuracy of the model was verified by experimental results. The average error of the cylinder pressure, the average radical of the square of the error of t...

The study investigates the effect of aluminium oxide nanoparticles as an additive to Madhuca Indica (mahua) methyl ester blends on performance, emission analysis of a single-cylinder direct injection diesel engine operated at a constant speed at different operating conditions. The test fuels are indicated as B10A0.2, B10A0.4, B20A0.2, B20A0.4 and diesel respectively. The results indica...

This thesis deals with numerical simulations of the turbulent combustion process in Homogeneous Charge Compression Ignition (HCCI) engines. An accurate and computationally efficient Large Eddy Simulation (LES) model was developed and used throughout this thesis to investigate the development of in-cylinder turbulence, temperature stratification, onset of auto-ignition, and development of the re...

Presented is a real-time engine brake torque estimation model where the instantaneous measured engine speed serves as the model input. The model is comprised of notch filters executed in the crank-angle domain to extract mean engine speed and the nth frequency component from the instantaneous engine speed signal in real-time. Here n denotes the number of engine cylinders. Moreover, the engine b...

The development and implementation of a diesel engine combustion system simulation model is described. The model is a crank angle based combustion model, which uses the conditions in the intake and exhaust manifolds together with the fuel injection signal from the engine control unit to estimate the in-cylinder pressure throughout a complete combustion cycle. The model is implemented in Matlab....

In case of automobile the fuel saving is the prime important with minimum emission and best performance. The phenomenon by which heat transfer takes place through engine fins must frequently be improved for these reasons. Air-cooling used to reduced weight and simple in construction of engine cylinder block. So,air-cooled engine build heat, the cooling fins permit the wind and air to move the h...

Among the alternative fuels, hydrogen shows great potential in the near future. In the present study, hydrogen utilization as diesel engine fuel was investigated. Hydrogen can not be used directly in a diesel engine due to its autoignition temperature higher than that of diesel fuel. One alternative method is to use hydrogen in enrichment or induction. To investigate the combustion characterist...

In this experimental study, the effect of alcohol (ethanol and methanol) use on the performance, emissions and combustion characteristics of a low power single-cylinder engine described the rated power output of the engine e.g. 2 kW were investigated and the results were compared with conventional gasoline operation. The tests were performed at full-throttle valve opening and variable engine sp...

Implementation of real-time combustion feedback for use in closed-loop combustion control is a technology that has potential to assist in the successful production implementation of advanced diesel combustion modes. Low-temperature, pre-mixed diesel combustion is presently of interest because it offers the ability to lower the engine-out emissions of oxides of nitrogen (NOx) and particulate mat...