The working process of marine diesel engine is simulated by combining mean value engine model and volumetric model. It reflects some average parameters such as effective pressure, effective power and engine speed, as well as reflects real-time explosion pressure, maximum temperature in cylinder and indicator diagram. In order to accelerate the simulation, Crank Angle and cylinder pressure is im...

To obtain the maximum output power and fuel economy from an internal combustion engine, it is often necessary to detect engine knock and operate the engine at its knock limit. This paper presents the ability to detect knock using in-cylinder ionization signals on a large displacement, air-cooled, “V” twin motorcycle engine over the engine operational map. The knock detection ability of three di...

the effects of unleaded gasoline and unleaded gasoline–ethanol blends on engine performance and pollutant emissions were investigated experimentally in a single cylinder, four-stroke spark-ignition engine with variable engine speeds (2600–3500 rpm). four different blends on a volume basis were applied. these are e0 (0% ethanol + 100% unleaded gasoline), e3 (3% ethanol + 97% unleaded gasoline), ...

An experimental study is carried out to investigate engine performance parameters and methods of reducing emissions from spark ignition engine. The used engine is four stroke four cylinder naturally aspirated spark ignition engine with compression ratio of 9, bore diameter of 80 mm and stroke of 90 mm. The engine performance parameters are presented with and without exhaust gases recirculation ...

This paper investigates the effect of replacing crankshaft with cam on the indicated torque during compression and power strokes in internal combustion engines. A Cycloidal cam profile was used in Revetec engine to calculate and compare the torque to a conventional engine, using a computational method. Firstly, the cylinder pressure was calculated using Ferguson equation, and then the torque ca...

This paper reports aldehyde emissions from two-stroke and four-stroke, single cylinder spark ignition (SI) engines with gasohol (80 vol. % gasoline, 20 vol. % ethanol) having copper coated engine (copper-coated thickness, 300 μm) on piston crown and inner side of cylinder head) provided with catalytic converter with sponge iron as catalyst and compared with conventional SI engine with gasoline ...

Biodiesel is one of the alternative fuels which is renewable and environmentally friendly and can be used in diesel engines with little or no modifications. In the present study, experimental investigations were carried out on the effects of biodiesel types, biodiesel fraction and physical properties on the combustion and performance characteristics of a compression ignition (CI) engine. The ex...

NOx is one of the major toxic emissions that needs to be regulated stringently in both EU and USA emission regulations. The engine designer is keen to get an accurate, reliable and cost effective NOx measurement system. In this paper, the application of the cylinder pressure for predicting the NOx emission of compression ignition (CI) engine fuelled with diesel and biodiesel during steady state...