Substantial improvements in engine fuel e ciency torque and reduction of emissions are available with cam less actuation capable of continuous control of engine valve lift duration and timing A phenomenological model has been developed for an unthrottled operation that is key to e ciency gain An adaptive nonlinear controller has been designed to coordinate intake valve lift and duration by usin...

Cylinder deactivation (CDA) is a technology that can improve the fuel economy and exhaust thermal management of compression ignition engines (diesel and natural gas), especially at low loads and engine idling conditions. The reduction in engine displacement during CDA improves fuel efficiency at low loads primarily through a reduction in pumping work. During deactivation of a given cylinder, th...

Using an isolated measurement process, I’ve calculated the effect measurement has on entropy for the multi-cylinder Szilard engine. This calculation shows that the system of cylinders possesses an entropy associated with cylinder total energy states, and that it records information transferred at measurement. Contrary to other’s results, I’ve found that the apparatus loses entropy due to measur...

The flow and turbulence in an IC engine cylinder were studied using the SSG variant of the Reynolds stress turbulence closure model. In-cylinder turbulence is characterized by strong turbulence anisotropy and flow rotation, which aid in air-fuel mixing. It is argued that solving the differential transport equations for each turbulent stress tensor component, as implied by second-moment closures...

A key element for thermal stress analysis of engine blocks and cylinder heads is an accurate representation of the temperature distribution in the given component. In order to predict the temperature accurately, spatially resolved thermal boundary conditions from the cylinder are required. For the SI engine studied, the Zimont [1] model is used for the in-cylinder combustion and the heat transf...

Nowadays biodiesel is receiving more attention as a most important renewable energy for using in diesel engines. Inthis research, the application of Response Surface Methodology (RSM) was highlighted to investigate the effects of biodiesel-diesel blends (B0, B20, B50 and B100), engine operating parameters (engine load and  speed) on CO2 emission of a diesel engine. The experiments were conducte...

This paper analyzes the vibration behavior of an in-line 4-cylinder, 4-strokes, internal combustion turbocharged direct injection gasoline engine. A detailed multi-body numerical model of the engine prototype was used to characterize the whole engine dynamic behavior, in terms of forces and velocities. The crank train multi-body model was created starting from engine geometrical data, and the a...

An experimental study is performed to investigate the fuel impingement on cylinder walls and piston top inside a directinjection spark-ignition engine with optical access to the cylinder. Three different fuels, namely, E85, E50 and gasoline are used in this work. E85 represents a blend of 85 percent ethanol and 15 percent gasoline by volume. Experiments are performed at different load condition...

This study investigates experimentally the effects of hydrogen addition in the intake manifold of a diesel generator operating with a 7% biodiesel-diesel oil blend (B7). An experimental apparatus setup was used to conduct performance and emissions tests in a single cylinder, air cooled diesel engine. This setup consisted of a generator set connected to a wirewound resistor load bank that was us...

This paper deals with the experimental investigations of the in-cylinder tumble flows in an unfired internal combustion engine with a flat piston at the engine speeds ranging from 400 to 1000 rev/min., and also with the dome and dome-cavity pistons at an engine speed of 1000 rev/min., using particle image velocimetry. From the two-dimensional in-cylinder flow measurements, tumble flow analysis ...