New materials capable of storing thermal energy in view building applications have been developed from the foaming ethylene-propylene diene monomer (EPDM) rubber with addition paraffin as a phase change material (PCM) at melting temperature about 21°C. Considering that EPDM foams prepared by using traditional chemical blowing agents are generally characterized rather elevated environmental load...

the organo-metal salt of aluminum triacrylate (alta) with a general formula of (ch2=chcoo)3al was  synthesized  as  a  reactive  fller  for  elastomers through a two-step synthetic procedure. fourier transform-infrared spectroscopy (ftir), dsc and dta were employed for alta analysis and to study its cure characteristics. in this research, two composites based on ethylene propylene diene monomer...

Ethylene Propylene Diene rubber (EPDM), is present in many applications. However, its crosslinked structure makes difficult recycling. The use of devulcanized EPDM, (dEPDM) as a component elastomeric composites, real possibility to reuse EPDM scraps. In this study, three matrices (natural (NR), styrene butadiene (SBR) and rubber) have been tested including recycled component. previously was usi...

Abstract Foamed rubber with a mixed cellular microstructure is compressible material used for various sealing applications in the automotive industry. For technical optimization, sufficiently precise model required. Here description porous elastic and viscoelastic response of low density foamed proposed adapted to ethylene propylene diene monomer (EPDM)-based rubber. The based on spherical shel...

Modeling of complex systems requires large and expensive computational systems. Costs processing time can be reduced by more than half in a well-managed cloud environment. the flow ethylene propylene diene monomer (EPDM) through Garvey die was achieved employing latest computer technology commercially available at modest cost. The description stress–strain behavior for EPDM done using Otswald-d...

Immiscible blends of ethylene?propylene?diene?monomer (EPDM) and polyoxymethylene (POM), when EPDM is the major phase were compatibilized on addition an ionomer, poly(ethylene?co?methacrylic acid). The inclusion ionomer reduced interfacial tension between two phases, such that diameter POM domains significantly to 0.5 2 ?m, typical required toughen ductile polymers. mechanical properties result...