In this work, modified silicone tie-paints were prepared in a simple way for securing adhesion between the epoxy anticorrosive primer and fouling release coating. Hydroxy-terminated polydimethylsiloxane (PDMS) mixture containing fillers accessory ingredient was as base component. N-(2-Aminoethyl)-3-aminopropyltrimethoxysilane (DAMO) mechanically mixed with other functional additives curing ATR-...

By referring to the domestic and foreign researches on color anti-skid pavement, composition of epoxy resin coating material for antiskid pavement is designed. The purpose experiment analyze effect nano-modified by adding 2.5% nano-organic montmorillonite modifier existing surface material. Test compare change mechanical properties binder before after nano-modified. Then nano-modification analy...

Abstract Epoxy resin has been widely applied in coating preparation, due to its excellent properties. The anti‐corrosion performance improvement of epoxy‐based coatings attracted much attention. synergistic effect the barrier function two‐dimensional fillers and slow release inhibiter proven be an effective way improve coatings. In this work, phytic acid (PA) intercalated hydrotalcite (HT) was ...

Steel pile pipes used for offshore applications and port construction are subject to high levels of corrosion. To protect the top end steel pipe against aggressive corrosion conditions, splash zone is coated with epoxy. For a strength system applications, requirement long term durability coating was specified as C5 (H) Im2 according ISO 12944. The specimens glass flake reinforced epoxy were exp...

The present study investigates the mechanical and thermal behavior of polyurethane electrostatic powder coating waste reinforced epoxy composites. Different percentages (3, 6, 9 wt. %) composites were manufactured. mixture was mixed with a magnetic stirrer to ensure that dispersed well in epoxy, then placed under vacuum air bubbles removed. Tensile three-point tests performed determine changes ...

The purpose of this project is to investigate on mechanical properties fibre coated reinforced composites. Tensile the flax fabrics tested at different resin treatment. tensile test evaluate effect epoxy coating strength fiber and predict behavior how influence results show that epoxy-coated considerably higher compared with non-coated composite materials. reference sample, i.e., without 18.7 M...

It is shown that the value of adhesion strength at the metallisation/polymer interface can be determined directly from a printed wiring board (PWB) by a pull-off method. However, careful optimisation of the test geometry is required. In particular, the mechanical properties of the substrate are important. The use of flexible substrate in the test results in severe underestimation of the adhesio...