A protocol is described to assess self-healing of crack damage in a polymer coating deposited on a substrate containing a microvascular network. The bio-inspired coating/substrate design delivers healing agent to cracks in the coating via a three-dimensional microvascular network embedded in the substrate. Through capillary action, monomer flows from the network channels into the crack plane wh...

in this work, the effect of erosion on corrosion behavior of coal tar epoxy coating was evaluated usingelectrochemical impedance spectroscopy (eis) measurements. the surface morphology of the coatingwas examined by scanning electron microscope (sem) after 10, 20, 30, 45 and 60 min of erosion processat an impact angle of 90º. after 10 min of erosion process, the nyquist plots showed just a singl...

In this study, vanadium conversion coating(VCC) was deposited on the surface of soft-cast steel (St-37).  A thermoset coating was enforced on the VCC and blank substrates. The surface was characterized by field emission scanning electron microscope (FE-SEM), elemental mapping of energy dispersive X-ray (EDX) and atomic force microscopy (AFM). The adhesion strength...

The performance of internal combustion engines should be improved depending on some technological requirements and rapid increase in the fuel expenses. On the other hand, the improvements in engine materials are forced by using alternative fuels and environmental requirements. Therefore, the performances of engine materials become increasingly important. The purpose of PZT loaded cyanate modifi...

Flexible, light weight and low cost electroactive coating has been fabricated by the dispersion of inorganic ferroelectric submicron particles in a polyurethane matrix. BaTiO3 particles have a mean diameter of 300 nm. The poling process and the influence of volume fraction of BaTiO3 on the piezoelectric activity of the coating have been reported. This spray coating has been realized on 1.6× 1.6...

A composite coating of polytetrafluoroethylene and epoxy shows 100 · improvements in wear resistance as compared to either of its constituents alone and reduced friction coefficient under testing on a pin-on-disk tribometer. This coating is made by impregnating an expanded PTFE film with epoxy, which provides three unique functions: (1) the epoxy compartmentalizes the PTFE nodes, which is belie...

In an electronics plant, 2 one-component epoxy coatings containing a modified polyamine hardener were used as covering materials for protecting important information on police radio circuit boards. The resinous parts of the coatings consisted of epoxy resins based on diglycidyl ether of bisphenol F. The hardener was a dimethylaminopropylamine (DMAPA)-epoxy adduct and contained about 0.16% free ...

Durable superhydrophobic coatings were synthesized using a system of silica nanoparticles (NPs) to provide nanoscale roughness, fluorosilane to give hydrophobic chemistry, and three different polymer binders: urethane acrylate, ethyl 2-cyanoacrylate, and epoxy. Coatings composed of different binders incorporating NPs in various concentrations exhibited different superhydrophobic attributes when...

In this study, Plasma Electrolytic Oxidation (PEO) at three frequencies of 500, 1000 and 3000 Hz was applied on Mg surface and the effect of PEO surface preparation on protective behavior of three types of epoxy, fusion bond epoxy (FBE) and polyurethane coatings was investigated. The microstructural and protective properties of PEO coatings were studied by SEM, potentiodynamic polarization and ...