Regulation of residual stress in a component is the key to improving its service performance. A cold expansion method was proposed for reducing 7050 aluminium alloy curved frame forging after quenching. The effect on and equivalent plastic strain distribution investigated. results showed that maximum at center thickness reduced from 153 MPa 94 expansion, while it decreased 283 120 surface with ...

Abstract-An Eulerian finite element formulation is presented for problems of large elastic-plastic flow. The method is based on Hill’s variational principle for incremental deformations, and is ideally suited to isotropically hardening Prandtl-Reuss materials. Further, the formulation is given in a manner which allows any conventions finite element program, for “small strain” elastic-plastic an...

Failure of solder joints under shear frequently occurs along a path near and parallel to, but not necessarily exactly at, the interface between the alloy and the bonding material. A numerical finite element analysis was employed to simulate the deformation in solder during cyclic lap-shear testing. High magnitudes of equivalent plastic strain were seen to initiate from the corner regions and sp...

We employ x-ray scattering on sheared colloidal suspensions and mode coupling theory to study structure factor distortions of glass-forming systems under shear. We find a transition from quadrupolar elastic distortion at small strains to quadrupolar and hexadecupolar modes in the stationary state. The latter are interpreted as signatures of plastic rearrangements in homogeneous, thermalized sys...

The advanced transient concrete model (ATCM) is an extended model for concrete in compression at elevated temperature that incorporates elastic, plastic and creep strain as a function of temperature and stress history. The ATCM is applied with the material model of the thermal induced strain model. The non-linear model comprises thermal strain, elastic strain, plastic strain and transient tempe...

The main objective of the present paper is to provide a simple analytical solution for describing expansion two-layer tube under plane-strain conditions its subsequent use in preliminary design hydroforming processes. Each layer’s constitutive equations are an arbitrary pressure-independent yield criterion, associated plastic flow rule, and hardening law. elastic portion strain neglected. metho...

This study concerns the superplastic forming process of 7475 aluminum alloy sheets. The objective is to define the interaction between the plastic strain and the evolution of the grain size of parts obtained by superplastic inflation. These parts are specially designed to show significant strain gradients. The rheological parameters of the sheet aluminum under conditions of superplastic forming...

Finite Element Modelling used to predict machining outcomes needs be supplied with the appropriate material thermomechanical properties which are obtained by specific testing devices and methodologies. However, these tests usually not representative of extreme conditions achieved in processes law may suitable enough. Inverse identification could address this problem obtaining directly from such...

The focus of this study is the thermomechanical characterization and comparison between two different shape memory alloys (SMAs) quantifying the effect of plastic strain on the transformation characteristics of SMA actuators. In this study, the thermomechanical response and transformation characteristics of a NiTiCu and a NiTi SMA are studied as a function of the induced plastic strain for four...