In order to discuss the advent of the magnetic-field-induced strains for a single crystal Fe22:0Ni51:5Ga26:5 shape memory alloy, the magnetic easy axis in the 14M martensite phase and the magnetocrystalline anisotropy constant K have been investigated. From the data on the spontaneous thermal expansion and the magnetization curves, the magnetic easy axis of the 14M martensite phase was determin...

Shape memory alloy offer an interesting solution, using the shape transformation of the wire/structure in the moment of applying a thermal type transformation able to offer the martensitic temperature. In order to assure an efficient control of SMA actuator applied to inverted pendulum, a mathematical model and numerical simulation of the resulting model is required. Due a particular possibilit...

Abstract An innovative study of the magnetocaloric effect (MCE) was performed by mapping based on direct measurements temperature change during magnetic field cycles with microscopic resolution (85 μ m) a Co-doped Ni–Mn–Ga bulk sample using infrared thermography whole sample. The MCE maps were constructed for different temperatures ( T ), cycling both heating (from 272.8 K up to , ⩽ 327.0 K) an...

In this research a Cu-Zn-Al alloy is produced by melting the raw materials in an electric resistance furnace and then pouring it into a steel mould. The optimum way to achieve the final analysis in the hypo-eutectoid range is determined and the influence of the alloying element, Ti on the grain size and the shape memory properties of the samples are investigated. Solution treatment (done at 850...

A shape memory device, and thus the alloy, when not operating is generally held in the martensitic condition. Also the shape memory effect depends on the retransformation of the martensite to the parent phase (i). Use of an alloy in a temperature controlling device, therefore, demands reliability and reproducibility of this retransformation temperature with shape memory cycles and more particul...

In this research a Cu-Zn-Al alloy is produced by melting the raw materials in an electric resistance furnace and then pouring it into a steel mould. The optimum way to achieve the final analysis in the hypo-eutectoid range is determined and the influence of the alloying element, Ti on the grain size and the shape memory properties of the samples are investigated. Solution treatment (done at 850...

We have been developing a pulmonary circulatory assist device using shape memory alloy fibres for Fontan circulation. It consisted of several shape memory alloy fibres, which covered the ePTFE conduit circumferentially. We designed the sequential motion control system for pulsatile flow generation for sophisticated pulmonary hemodynamics. In order to achieve physiological pulsatile flow assista...