Frictional shear stress is usually determined by utilizing the coefficient of friction or the constant friction factor models. The present study deals with finite element analysis of double cup extrusion process to determine the relationship between constant friction factor (m) and coefficient of friction (µ), since the metal flow in this process is very sensitive to frictional conditions. Ther...

This paper presents a simple method based on strain energy density criterion to study the crack initiation angle by finite element method under biaxial loading condition. The crack surface relative displacement method is used to eliminate the calculation of the stress intensity factors which are normally required. The analysis is performed using higher order four node quadrilateral element. The...

Numerical models can be valuable tools in the prediction of seepage. The results can often be misleading if proper variational analysis is not performed. Measurement of the soil-water characteristic curve (SWCC) or saturated and unsaturated hydraulic conductivity information is often neglected or minimized. The modeller is therefore forced to develop a seepage model based on estimated soil prop...

the most important quality indicator of fruits is the flesh firmness which is well correlated to their young’s modulus. in this research variation of vibration characteristics (shape modes, natural frequency) of apple due to change of material characteristics (density, young's models, poisson ratio) and apple volume was investigated using finite element simulation. an image processing technique...

analysis of the stresses, displacements, and horizontal strains of the ground subsidence due to underground excavation in rocks can be accomplished by means of a hybridized higher order indirect boundary element/finite difference (be/fd) formulation. a semi-infinite displacement discontinuity field is discretized (numerically) using the cubic displacement discontinuity elements (i.e. each highe...

In this study, Buckling Limit of Strain (B.L.S.) is introduced as one of the most important limiting factors in cold roll forming process. B.L.S. is calculated by the finite element procedure. Then for two particular processes with existing analysis and experimental results, B.L.S. has been determined and evaluated. LUSAS 12.3 is used for finite element analysis. The results show that when buck...

it is correct control and monitoring of modern embankment dams that are very vital in the geotechniqual constructions. the improvement of methods of stability control, using the effective stress and the measurement of ganglionic water pressure in embankment dams cause more the safety for this kind of dams. nowedays there is such an idea that in stead of using of being safety factor against coas...

In this paper, results obtained in both conventional and finite element analysis of straight and belled anchor shafts subjected to a pullout force are presented. In numerical analysis, it is assumed that no drainage takes place during the anchor pullout. Comparisons between two conventional methods of analysis for ultimate pullout load and the results obtained by the finite element analysis are...

In this paper the damage location in beam like-structure is determined using static and dynamic data obtained using finite volume method. The change of static and dynamic displacement due to damage is used to establish an indicator for determining the damage location. In order to assess the robustness of the proposed method for structural damage detection, three test examples including a static...

In this paper‎, ‎the static bending‎, ‎free vibration‎, ‎and dynamic response of functionally graded‎ ‎piezoelectric beams have been carried out by finite element method‎‎under different sets of mechanical‎, ‎thermal‎, ‎and electrical‎ ‎loadings‎. ‎The beam with functionally graded piezoelectric material‎ ‎(FGPM) is assumed to be graded across the thickness with a simple‎ ‎power law distributio...