An important technique used for the suppression of surface flashover on high voltage DC ceramic insulators as well as for RF windows is that of providing some surface conduction to bleed off accumulated surface charge. We have used metal ion implantation to modify the surface of high voltage ceramic vacuum insulators to provide a uniform surface resistivity of approximately 5 x 1010 Ω/square. A...

DOI: 10.5281/zenodo.60115 ABSTRACT In order to improve the reliability of power transmission lines, one of the key issues is to reduce the hazard of contamination flashovers. At the present time, the most efficient way is to clean (or replace) the heavily polluted insulators. This study laboratory based tests were carried out on the model under ac voltage at different pollution levels. A new mo...

The propagation of local arcs are necessary for a flashover to occur on an ice-covered insulator. It was supposed that the local AC arc extended when it satisfied the arc re-ignition conditions. In this paper an attempt has been made to model Va = f ( I , L , x ) for estimating the arc re-ignition conditions as function of leakage current and insulator length using multi-layer feed-forward neur...

This paper describes a simple and reliable method of improving the surface insulation strength of a spacer used in vacuum. The method is to roughen the spacer surface to an average roughness R higher than 1 or 2 m. The material of the spacer a examined is SiO , PMMA, PTFE or Al O and their shape is a right cylinder with 2 2 3 10 mm in height and 54 mm in diameter. The spacer is subjected to a r...