We propose a method for motion control of a redundant manipulator on a flexible base. Manipulator selfmotion is determined from a velocity-level additional constraint obtained from base vibration dynamics. End-effector path tracking is ensured via pseudoinverse-based velocity control. In this way, algorithmic singularities associated with the additional constraint are avoided. The vibration sup...

This paper presents investigations into the development of linear quadratic regulator (LQR) robust control of a flexible link manipulator. The dynamic model of the system is developed using a finite element methods (FEM). The problems of a flexible link manipulator are uncertainties and parametric nonlinearities. Previous researches have fathom around control methods for the system, few present...

Near-minimum-time control of flexible manipulators can be accomplished by designing a controller that tracks a reference maneuver. The control method presented here uses a near-minimum-time rigid-link reference maneuver to generate reference control torques and a Liapunov controller to make the flexible manipulator track the reference maneuver while reducing and eventually eliminating flexible ...

The dynamics and control of flexible link manipulators (FLMs) are increasing in industrial robotics research. In which the problem inverse is a that has been studied little no general solution. this paper, an approximation method presented to calculate reverse serial with rigid-flexible links. linearization motion equations for translation rotation two-link manipulator (manipulator T-R) address...

Abstract The dynamics for multi-link spatial flexible manipulator arms is investigated. The system considered here is an N-flexible-link manipulator driven by N DC-motors through N revolute flexiblejoints. The flexibility of each flexible joint is modeled as a linearly elastic torsional spring, and the mass of the joint is also considered. For the flexibility of the link, all of the stretching ...

In this paper, a NCGPC (Nonlinear Continuous Time Generalized Predictive Control) is proposed for a single-link flexible joint manipulator. This control is developed by using a property of NCGPC, the demonstration that the selection of particular design parameters, such as control order and predictor order leads to well-known feedback linearization. Simulations are presented in order to illustr...

Dynamics of multi-link manipulators with flexible links include complex high-order equations which make their control problem very challenging. This paper presents a new method for simultaneous motion and vibration control of a twolink flexible manipulator using H2/H∞ control. A multi-element finite element model of the manipulator is casted into the generalized plant model, and H2 and H∞ contr...

The active vibration suppression of a single flexible link manipulator using a piezoelectric actuator is investigated. For this purpose, a finite element (FE) model is developed for the modal and transient analysis of a cantilever beam and a flexible link manipulator. A proportional control strategy is employed in a FE model to adjust the voltage applied to the piezoelectric actuator so as to c...

The explicit, non-recursive symbolic form of the dynamic model of robotic manipulators with compliant links and joints are developed based on Lagrangianassumed modes formulation. This form of dynamic model is suitable for controller synthesis, as well as accurate simulations of robotic applications. The final form of the equations are organized in a form similar to rigid manipulator equations. ...

This paper presents a nonlinear control for trajectory tracking and vibration control of a flexible joint manipulator by using chaotic gyroscope synchronization. To study the effectiveness of the controllers, designed controller is developed for tip angular position control of a flexible joint manipulator. Based on Lyapunov stability theory, the nonlinear controller and some generic sufficient ...