UNLABELLED Complete dentures often fracture during normal masticatory function. The reason could be due to the shape of the palate, i.e. deep, medium or shallow palatal vault. This in vitro study was performed to determine the relationship of palatal vault depth and flexural strength of two different permanent denture base resins. Edentulous maxillary casts of patients were collected from the d...

objective(s): the aim of this study was to synthesis new dental nanocomposites reinforced with fabricated glass nanoparticles and compare two methods for fabrication and investigate the effect of this filler on mechanical properties. materials and methods: the glass nanoparticles were produced by wet milling process. the particle size and shape was achieved using psa and sem. glass nanoparticle...

The aim of this in vitro study was to compare the flexural, compressive and diametral tensile strengths of five cements used in orthodontics for band cementation. Twelve specimens of each cement were tested: 1 - GC Fuji Ortho Band (FJ), GC America Inc.; 2 - Meron (MR), Voco; 3 - Multi-Cure Glass Ionomer Band Cement (MC), 3M Unitek; 4 - Band-Lok (BL), Reliance Orthodontic Products; and 5 - Ketac...

Abstract: Composite specimens were prepared by dispersion of various amounts of nano-sized Al2O3 fillers in a monomer system containing 60% Bis-GMA and 40% TEGDMA. For comparative purposes, composite samples containing micrometer size Al2O3 fillers were also prepared following the same procedure. The mechanical properties of the light- cured samples were assessed by three-point flexural strengt...

This study evaluated the color stability, surface roughness and flexural strength of a microwave-polymerized acrylic resin after immersion in sodium hypochlorite (NaOCl), simulating 20 min of disinfection daily during 180 days. Forty disk-shaped (15 x 4 mm) and 40 rectangular (65 x 10 x 3 mm) specimens were prepared with a microwave-polymerized acrylic resin (Onda-Cryl). Specimens were immersed...

The effect of nanoclay content on the properties of glass fibre reinforced, waterborne epoxy laminates is investigated. Fourteen ply nanocomposite laminates containing 0, 0?1, 0?2, 0?5, 1 and 2 wt-% cloisite Na nanoclay are fabricated by a hot press. The interlaminar shear strength, flexural strength and flexural stiffness of the fabricated nanocomposites are characterised. In addition, the the...

This study assessed the cross-sectional Knoop microhardness and flexural strength of root dentin exposed to different surface treatments with chemical agents after biomechanical preparation. Root canals from human canines were biomechanically treated and divided into eight groups (n=10) to receive one of the following dentin treatments: I. Deionized water (control); II. 5.25% Sodium hypochlorit...

Objective: This study investigated the effect of different sintering temperatures and times on the flexural strength and grain size of zirconia. Material and methods: Zirconia specimens (In-Coris ZI, In-Coris TZI, 120 samples) were prepared in a partially sintered state. Subsequently, the specimens were randomly divided into three groups and sintered at different final sintering temperatures an...

This study concerned the effect of heat treatment during setting on the physical properties of four resin-based provisional restorative materials: Duralay (polymethyl methacrylate), Trim II (polyethyl methacrylate), Luxatemp (bis-acrylic composite), and Protemp 4 (bis-acrylic composite). Specimens were prepared at 23, 37, or 60 °C for evaluation of flexural strength, surface roughness, color ch...