Surface wettability is recognized as playing an important role in pool boiling and the corresponding heat transfer curve. In this work, a systematic study of pool boiling heat transfer on smooth surfaces of varying wettability (contact angle range of 5° - 180°) has been conducted and reported. Based on numerical simulations, boiling curves are calculated and boiling dynamics in each regime are ...

Liquid paraffin can be used as a coolant fluid in electronic and cutting devices due to its suitable capabilities such as electrical insulating, high heat capacity, chemical, and thermal stability, and high boiling point. In this study, the dynamic viscosity of paraffin containing the alumina nanoparticles has been examined experimentally. The nanofluids with different composition of alumina (0...

There has been increasing interest of late in nanofluid boiling and its use in heat transfer enhancement. This article covers recent advances in the last decade by researchers in both pool boiling and convective boiling applications, with nanofluids as the working fluid. The available data in the literature is reviewed in terms of enhancements, and degradations in the nucleate boiling heat tran...

Recent advances in computational fluid dynamics (CFD) codes along with high performance computing hardware made the codes more useful in many engineering applications. For instance, single-phase CFD codes have long been used to predict the fluid flow in fuel channels of a pressurized water reactor (PWR) [1, 2]. Considering the current affordable number of computation mesh is a little below one ...

Cryogenic fluids have found many practical applications in today’s world, from cooling superconducting magnets to fueling launch vehicles. In many of these applications the cryogenic fluid is initially introduced into piping systems that are in excess of 150 degrees Kelvin higher than the fluid. This leads to voracious evaporation of the fluid and significant pressure fluctuations, which is acc...

In this paper, a skin-contact-actuated dispenser/pump is described. The dispenser consists of stacked PDMS layers mounted on a silicon substrate and operates based on the evaporation and condensation of a low boiling point liquid. Therefore, there is no need for a heater or a battery, since the only required source of energy is the heat provided by skin contact. A prototype device with overall ...

The forces due to surface tension and momentum change during evaporation, in conjunction with the forces due to viscous shear and inertia, govern the two-phase flow patterns and the heat transfer characteristics during flow boiling in microchannels. These forces are analyzed in this paper, and two new nondimensional groups, K1 and K2 , relevant to flow boiling phenomenon are derived. These grou...

Accurate prediction of critical heat flux (CHF) in microchannels and minichannels is of great interest in estimating the safe operational limits of cooling systems employing flow boiling. Scale analysis is applied to identify the relevant forces leading to the CHF condition. Using these forces, a local parameter model is developed to predict the flow boiling CHF. The theoretical model is an ext...

Vibration characteristics of subcooled flow boiling on thin and long structures such as a heating rod were recently investigated by the author. The results show that the intensity of the subcooled boiling-induced vibration (SBIV) was influenced strongly by the conditions of the subcooling temperature, linear power density and flow velocity. Implosive bubble formation and collapse are the main n...

The design and reliable operation of a two-phase micro-channel heat sink require a fundamental understanding of the complex transport phenomena associated with convective boiling in small, parallel coolant passages. This understanding is the primary goal of this paper. This goal is realized by exploring the following aspects of boiling in microchannels: hydrodynamic instability, two-phase flow ...