This paper explores the subcooled nucleate boiling and critical heat flux (CHF) characteristics of a hybrid cooling module that combines the cooling attributes of micro-channel flow and jet impingement. A test module was constructed and tested using HFE-7100 as working fluid. Increasing the coolant’s flow rate and/or subcooling shifted both the onset of boiling (ONB) and CHF to higher heat flux...

The purpose of this investigation is to compare the development boiling phenomenon in an analytical and numerical way, by means heat transfer coefficient for two phases steam quality with R600a refrigerant, inside a square steel tube up 3 cm side, simulation carried out using software computational fluid dynamics (fluid ANSYS). Finding increase high calorie flow low thickness. Finally, it finds...

The effects of dissolved air in the dielectric liquid FC-77 on flow boiling in a microchan-nel heat sink containing ten parallel channels, each 500 ␮m wide and 2.5 mm deep, were experimentally investigated. Experiments were conducted before and after degas-sing, at three flow rates in the range of 30– 50 ml/ min. The dissolved air resulted in a significant reduction in wall temperature at which...

The connectivity index chi can be regarded as the sum of bond contributions. In this article, boiling point (bp)-oriented contributions for each kind of bond are obtained by decomposing the connectivity indices into ten connectivity character bases and then doing a linear regression between bps and the bases. From the comparison of bp-oriented contributions with the contributions assigned by ch...

We study heat transfer from a heated nanoparticle into surrounding fluid using molecular dynamics simulations. We show that the fluid next to the nanoparticle can be heated well above its boiling point without a phase change. Under increasing nanoparticle temperature, the heat flux saturates, which is in sharp contrast with the case of flat interfaces, where a critical heat flux is observed fol...

The effect of flow instabilities on flow boiling heat transfer in microchannels is investigated using water as the working fluid. The experimental test section has six parallel rectangular microchannels with each having a cross sectional area of 1054 × 197 microns. Flow restrictors are introduced at the inlet of each microchannel to stabilize the flow boiling process and avoid the backflow phen...

The ̄ow boiling phenomenon over a heated tube restricted by an interference sleeve, which is a passive enhancement technique, has been analysed using a semi-empirical approach. The liquid boiled was water ̄owing through an annular cross-section. A model developed earlier for the case of pool boiling over porous surfaces has been adapted after modi®cation to pool boiling with interference surfac...

Pool boiling heat transfer characteristics of Al2O3 -water nanofluids is studied experimentally using a NiCr test wire of 36 standard wire guage diameter. The experimental work mainly concentrated on (1) change of critical heat flux with different volume concentrations of nanofluid and (2) flow visualization of pool boiling using a fixed concentration of nanofluid at different heat flux values....

Poor understanding of flow boiling in microgravity has recently emerged as a key obstacle to the development of many types of power generation and life support systems intended for space exploration. This study examines flow boiling CHF in microgravity that was achieved in parabolic flight experiments with FC-72 onboard NASA s KC-135 turbojet. At high heat fluxes, bubbles quickly coalesced into...

An easy-to-implement technique for pool boiling heat transfer enhancement is proposed and evaluated through an experimental investigation. This free-particle technique brings about nucleate boiling at a low degree of superheat by means of metal particles that are not fixed to the heated surface, but rather are free to move with respect to the surface. The effects of copper particles with sizes ...