Multilevel inverters have been opted for high power applications due to reduced harmonic distortion, less device voltage stress and modular structure. This work proposes new modified hybrid Hbridge multilevel inverter using auxiliary switch. This proposed inverter produces five levels output with five power devices and clamping diodes as a phase voltage and nine levels as a line voltage.The lev...

A scheme for a three-level voltage space phasor generation with common-mode voltage elimination is proposed. An open-end-winding induction motor, fed from both ends by two threelevel inverters, which are realised by a cascading two two-level inverter, is used in this configuration. The voltage space vectors of individual three-level inverters, which generate the same commonmode voltage in the i...

The faulty performance of permanent-magnet (PM) brushless dc motor drives is studied under one and simultaneous two open-switches faults conditions. This DC motor is supplied with a three phase two level six IGBT voltage source inverter. The three phases currents mean values of the DC motor are used as diagnostic indices. A knowledge algorithm is based to get information on which IGBT is in ope...

Multilevel inverters have been opted for high power applications due to reduced harmonic distortion, less device voltage stress and modular structure. This work proposes new modified hybrid Hbridge multilevel inverter using auxiliary switch. This proposed inverter produces five levels output with five power devices and clamping diodes as a phase voltage and nine levels as a line voltage.The lev...

In this paper, two intelligent direct torque control strategies are compared with the classical direct torque control (C-DTC) scheme, namely neural network control (NNC) and neuro-fuzzy control (NFC) are introduced to replace the hysteresis comparators and lookup table of the C-DTC for pulse width-modulation-inverter-fed induction motor drive, to solve the problems of torque ripple and inconsta...

This paper proposes a nine level cascaded multilevel inverter based on the flip flops and logic gates. Generally multilevel inverter is used to achieve the high power by using a series of power semiconductor switches with the several dc voltage sources which is used to perform the power conversion. In this paper the flip flop based CMLI is compared with the conventional CMLI. The flip flops and...

The maximum boost control method for a single-phase switched-boost inverter (SBI) and single-phase Z-source inverter (ZSI) is proposed in this paper. In the proposed method, the low frequency voltage is added to the constant voltage for generating the variable shoot-through time intervals. For improving the AC output quality of the inverter, an active power switch is used to replace one of the ...

This paper presents a theoretical comparison between a static-CMOS and a hybrid-RERL design of an inverter. The measurements taken into account are the total power dissipation, the performance in terms of propagation delay, and the size of each design. The hybrid-RERL architecture uses the RERL format except it reduces the 6-phase clock presented in earlier papers to a 5-phase clock by replacin...

In this paper,Hybrid power filer (HPF) six switch two leg inverter for improved harmonic campanstion. The praposed scheme is required to an other active filter with passive filter un luckily most of the HPF are have common drawback a most number of passive components or transformer. The HPF have small rated inverter and LC filter of this proposed method. HPF are connected to the grid with out a...

Three fundamental sine-wave inverter topologies are analyzed: two-leg (one-phase, two-wire); three-leg (three-phase, three-wire); and four-leg (three-phase, four-wire). The topologies are “full-bridge” voltage-source inverters with LC filters suitable for producing sinusoidal output voltages. The switching states and corresponding output voltage vectors produced by each inverter are identified ...