Degradation of cleavage fracture toughness for low carbon steels due to pre-straining and irradiation was investigated on the basis of the local fracture criterion approach. Formulation of cleavage fracture toughness through the statistical modelling proposed by BEREMIN has been simplified by the present authors to the expression involving yield stress and cleavage fracture stress of materials....

Electric tields can mtluence the fracture toughness offerroelectrics. For example, poled ferroelectrrcs cxhtbit fracture toughness anisotropy : the material is tougher for a crack parallel to the poling direction but less tough for a crack perpendicular to it. When an electric field is applied to a poled sample. a positive field reduces its fracture toughness but a negative field enhances it. P...

Indentation techniques for assessing fracture toughness are attractive due to the simplicity and expediency of experiments, and because they potentially allow the characterization of both local and bulk fracture properties. Unfortunately, rarely have such techniques been proven to give accurate fracture toughness values. This is a concern, as such techniques are seeing increasing usage in the s...

Mechanical behaviour of unsaturated polyester resin used for the composite materials has been studied to determine various important parameters, such as tensile and compressive, single edge-notch tensile fracture toughness, flexural properties and fracture energy. Fracture toughness, KIC, and fracture energy, GIC, obtained for the polyester resin lie between the typical values for epoxy resins ...

An investigation into the mixed mode fracture of steel fiber reinforced concrete (SFRC)beams with one percent volume fraction of steel fiber is presented. A series of notched beams withdifferent notch depths and locations are tested under three-point bending. The test results for apparentfracture toughness, crack trajectories, and fracture energy are presented. The crack paths for SFRCand plain...

Oxide Dispersion Strengthened (ODS) and TZM molybdenum have excellent creep resistance and strength at high temperatures in inert atmospheres. Fracture toughness and tensile testing was performed at temperatures between -1 50°C and 450°C to characterize 6.35 mm thick plate material of ODS and TZM molybdenum. A transition from low fracture toughness values (5.8 to 29.6 MPaJm) to values > 30 MPaJ...

Microencapsulated dicyclopentadiene (DCPD) healing agent and Grubbs’ Ru catalyst are incorporated into an epoxy matrix to produce a polymer composite capable of self-healing. The fracture toughness and healing efficiency of this composite are measured using a tapered double-cantilever beam (TDCB) specimen. Both the virgin and healed fracture toughness depend strongly on the size and concentrati...

Various types of hydroxyapatite (HA) structures have received great attention of scientific researcher in biomaterials field. Also, it is common that HA is the essential inorganic materials in human hard tissue such as bone or teeth. Fracture toughness and micro-hardness properties are the important parameters required for the prediction of the mechanical performance of biomaterials structures ...

The effect of microstructural variations on the fracture toughness of Alloy 718 was reviewed. The metallurgical parameters surveyed in this paper included heat treatment, heat-to-heat variations, product-form variations, neutron irradiation and long-term thermal aging. Key microstructural features and operative fracture mechanisms were related to macroscopic fracture toughness properties.

Nowadays, application of cermet coatings deposited by High-Velocity Oxygen-Fuel (HVOF) has received considerable attention in a variety of industries. Carbide coatings have high surface roughness, so it is essential to grind the coated surface. The present investigation studied the effect of simultaneous changes in the grinding parameters including the depth of cut, feed rate and cutting sp...