Batch adsorption experiments were carried out for the adsorption of cationic dye from aqueous solution onto composite activated carbon. The composite activated carbon was prepared from brewer’s spent grain and sea bean shell at a ratio of 1:1. The equilibrium studies were done at different concentrations and temperatures. The equilibrium data were fitted to Langmuir, Freundlich, Dubinin-Radushk...

The biosorbent was obtained from municipal solid waste (MSW) of the Mostaganem city. Before use the MSW was dried in air for three days and washed several times. The sorption of yellow procion reactive dye MX-3R onto biomass from aqueous solution was investigated as function of pH, contact time and temperature. The adsorption capacity of MX-3R was 45.84 mg/g at pH 2-3 and room temperature. MX-3...

Polyaniline titanotungstate (PATiW) was synthesized by the sol-gel method. Adsorption isotherm studies of Cs from aqueous solution are described. Elemental Composition, chemical solubility, ion-exchange capacity (IEC) and pH titration are studied. Distribution coefficients (Kd) for ten metal ions have been determined. It was found that the polyaniline titanotungstate has high affinity and high ...

The adsorption of dyes in the solutions using activated sludge might be a promising approach in wastewater treatment units. The adsorption of Basic Red 18 and Basic Blue 9 from aqueous solution by dried activated sludge was investigated with in a batch system. The activated sludge had the highest dye uptake capacity, having the monolayer adsorption capacity 285.71 and 256.41 mg g(-1) for Basic ...

This work aims to study the removal of Cu(II) and Cr(VI) from aqueous solutions with commercial coffee wastes. Materials with no further treatment such as coffee residues from café may act as adsorbents for the removal of Cu(II) and Cr(VI). Equilibrium data were successfully fitted to the Langmuir, Freundlich and Langmuir-Freundlich model (L-F). The maximum adsorption capacity of the coffee res...

This study investigates the effect of surface acidity and basicity of aluminas on asphaltene adsorption followed by air oxidation. Equilibrium batch adsorption experiments were conducted at 25°C with solutions of asphaltenes in toluene at concentrations ranging from 100 to 3000 g/L using three conventional alumina adsorbents with different surface acidity. Data were found to better fit to the F...

ABSTRACT: Excess fluoride ion (F) in drinking water causes harmful effects such as dental and skeletal fluorosis. Hence, its concentration in drinking water must not exceed a certain range. This study investigated the removal of F from aqueous solutions with CuO nanoparticles using a range of experimental approaches, including pH, adsorbent dose, contact times, and initial F concentration. The ...

Polyaniline/cerium oxide (PANI/CeO2) composites were prepared and characterized by XRD, FT-IR, nitrogen adsorption/desorption isotherms and TEM techniques. The PANI/CeO2 composites were used for removal of Remazol Red (RB-133) from aqueous solution. The adsorption behaviour of dye was studied at different experimental conditions of solution pH and reaction temperature. The adsorption isotherm s...

Biosorption is most economical method for removing toxic metals from waste water.The paper presents the results of studies carried out on sorption of zinc ions from aqueous solutions by a coffee industry waste s a low-cost sorbent. It was found that crushed coffee industry waste possess relatively high sorption capacity as 46.05 mg/g, when comparing with other sorbents. The biosorption studies ...

-Well-characterized American Petroleum Institute clay standards, source clays from The Clay Minerals Society, and other secondary minerals were used to determine the effects of U concentration, temperature, and solution composition on U-sorption properties. Uranium concentrations ranged from about 1.00 x 10 -4 M to 4.00 x 10 7 M, temperatures from 5 ~ to 65~ and solution compositions containing...