The weld penetration under different plasma welding currents was compared in the plasma-gas metal arc (GMAW) hybrid of aluminum alloy. When current lower than 150 A, greater sum single and GMAW penetration. reached 130 with increase current, advantage gradually weakened, that welding. above change mechanism is revealed from heat source energy distribution molten pool stress. results show when 1...

Abstract: During the last decade, the demand for natural gas has steadily increased for the prevention of environmental pollution. For this reason, many liquefied natural gas (LNG) carriers have been manufactured. Since one of the most important issues in the design of LNG carriers is to guarantee structural safety, the use of low-temperature materials is increasing. Among commonly employed low...

In recent years Gas Metal Arc Welding (GMAW) technology has expanded its functionalities in various areas which have further motivated usage several emerging manufacturing industries. There are issues and challenges associated with this technology, especially dissimilar metal welding (DMW). One of the predominant is selecting appropriate parameters influence efficiency technology. To explore mo...

welding produces residual stresses and distortion, having detrimental effect on structure integrity and service performance of the welded pipe joints. this paper investigates residual stresses and distortion during gas metal arc welding (gmaw) of pipes of schedule 40 and 60, nominal diameter 100mm and 200mm and thickness 8mm and 10mm with ansi flanges of class 300#. welding parameters including...

Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding, is an arc welding process that uses a nonconsumable tungsten electrode to produce the weld. The weld area is protected from atmospheric contamination by a shielding gas (usually an inert gas such as argon), and a filler metal is normally used, though some welds, known as autogenous welds, do not require it. A const...

Inert-gas Arc Welding of Aluminium Aluminium is used widely in metal fabrication processes, chiefly on account of its lightness, the ease with which it may be cast, and its extreme ductility. It is also highly resistant to corrosion, owing to the formation of a protective film of oxide on the surface of the metal. This latter property, however, becomes a disadvantage when it is desired to weld ...

The conjoint influence of welding and artificial aging on mechanical properties were investigated for extrusions of aluminum alloy 6063, 6061, and 6005A. Uniaxial tensile tests were conducted on the aluminum alloys 6063-T4, 6061-T4, and 6005A-T1 in both the as-received (AR) and as-welded (AW) conditions. Tensile tests were also conducted on the AR and AW alloys, subsequent to artificial aging. ...

In this work, the thin wall components of TC4 titanium alloy were produced by using external magnetic field hybrid gas metal welding (EM-GMAW). The effect on forming, microstructure, and property wire arc additively manufactured was studied in detail. results showed that height average deposition layer EM-GMAW less than GMAW decreased with increase excitation current, width greater GMAW. micros...

Gas Metal arc Welding (GMABQ has become the most addely used process for joining of steel plates due to its high productixity, simplicity of equipment and ease of use. Although the process of melting of the electrode and development of the weld deposit has been studied for 40 years, the dynamic nature of the process has not been studied in detail because accurate models are computationally inte...