background:: this study developed a smart co 2 detector, which attach to the general ventilation system to reduce the gas level. methods: indoor air quality measurement was performed in five selected rooms between january 2015 to february 2015 using tsi q-trak tm indoor air monitor 7575. the perceived indoor air quality conditions was gathered using questionnaires adopted from the industrial co...

welders may suffer from welding fumes generated during the process if the ventilation systems are improperly applied. the objective of the present work was to study the mitigation of air pollutants at welding stations, using different ventilation scenarios. four air pollutants including iron oxide, respirable dust, ozone, and carbon monoxide were measured during four different ventilation scena...

Recently, the incidence of pneumoconiosis due to inhalation of welding fumes has become increasingly remarkable in Japan. Although several engineering methods such as local exhaust ventilation, push-pull ventilation and general (dilution) ventilation have been preferred for controlling airborne contaminants released from welding work, thorough reduction of the welder’s exposure to welding fumes...

The air quality in air-conditioned mass transport buses may affect bus drivers' health. In-bus air quality improvement with the voluntary participation of bus drivers by opening the exhaust ventilation fans in the bus was implemented in the Seventh Bus Zone of Bangkok Mass Transit Authority. Four bus numbers, including bus numbers 16, 63, 67 and 166, were randomly selected to investigate microb...

Although the incidence of pneumoconiosis has been decreasing in Japan, welders’ health hazards due to welding fume inhalation are still serious, because effective engineering methods for controlling fumes are technically difficult to implement in many welding shops. In the 6th notification of general prevention of dust hazards issued by the Japanese Ministry of Health, Labor and Welfare (2003–2...

The goal of a laboratory’s general ventilation system is to control airborne contaminants below concentrations of concern while maintaining a comfortable environment. One concern while managing general laboratory ventilation is how uniformly the room is ventilated. We have observed that, depending on the configuration of the ventilation supply and exhaust points relative to the geometry of the ...

Most studies on the transmission of infectious airborne disease have focused on patient room air changes per hour (ACH) and how ACH provides pathogen dilution and removal. The logical but mostly unproven premise is that greater air change rates reduce the concentration of infectious particles and thus, the probability of airborne disease transmission. Recently, a growing body of research sugges...

Background & Aims of the Study: Welder’s exposure to welding fumes can cause occupational diseases. The current study sought to examine exposure to welding fumes among welders who work in the repair shop of Sarcheshmeh Copper Complex and design a local exhaust ventilation system to control exposure to welding fumes. Materials & Methods: This applied analytical study was co...

Ventilation is ambiguously related to the energy saving rationale originating from the mitigation of global warming, the reaching of peak oil or health concerns related to fossil fuel burning. Since it makes up for about half of the energy consumption in well insulated buildings, it is an attractive target for energy saving measures. However, simply reducing ventilation rates has unwanted reper...

8 High concentrations of airborne particulate matter in factories can cause serious health problems 9 for workers. One significant reason for these high concentrations is the poor performance of the 10 ventilation systems in workplaces. This investigation developed a strategy that combines 11 computational fluid dynamics (CFD) simulations and on-site measurements to study and improve 12 the ven...