Glass fiber-reinforced polymer (GFRP) concrete reinforcement exhibits high strength, is lightweight, can decrease time of construction, and is corrosion resistant. However, research has shown that chemical reactions deteriorate the GFRP reinforcing bars over time, resulting in a reduced tensile capacity. This paper develops a time-variant probabilistic model to predict the tensile capacity of G...

Fiber-reinforced composite (FRP) materials have gained an increasing success, mostly for strengthening, retrofitting and repair of existing historic masonry structures and may cause a significant enhancement of the mechanical properties of the reinforced members. This article summarizes the results of previous experimental activities aimed at investigating the effectiveness of GFRP (Glass Fiber...

This paper investigates experimentally and analytically the torsion behavior of steel fibered high strength self compacting concrete beams reinforced by GFRP bars. Steel fibered high strength self compacting concrete (SFHSSCC) and GFRP bars became in the recent decades a very important materials in the structural engineering field. The use of GFRP bars to replace steel bars has emerged as one o...

Glass fibre reinforced plastic (GFRP) is considered as structure support and insulating material for the new superconducting FAIR magnets. GFRP (G11) is a composite material consisting of woven glass fibres (volume fraction ~50 %) and cured polymer resin (e.g. amine-cured epoxy). The material will be exposed to cryogenic temperatures, high radiation levels and dynamic mechanical loads (Lorentzi...

Experimental investigation of GFRP (glass fiber reinforced polymer) tubes that were filled with magnetically driven concrete was carried out to study the flexural behavior of specimens under bending. Specimens having different cross section and lengths were tested. The test specimens were fabricated by filling magnetically driven concrete into the GFRP tubes and the concrete was vibrated using ...

Embedding FBG strain sensors within a GFRP sandwich composite material allows early detection of internal defects. However, the sensors need to survive the manufacturing process to provide this capability. Vacuum infusion is commonly used to manufacture GFRP sandwich composite materials but, it needs to be modified to accommodate the embedding process. A stage by stage procedure is demonstrated...

This paper presents results of testing eccentrically loaded columns externally wrapped with two types of materials. Six cylindrical (205 mm diameter and 925 mm height) plain columns were cast and tested. Half of the columns were wrapped with GFRP and the other half with CFRP. All columns were tested by applying an axial load at 50 mm eccentricity. In each group (GFRP or CFRP wrapped) of columns...

The purpose of this study was to propose a new numerical modeling of the glass fiber cloth reinforced denture base resin (GFRP). The proposed model is constructed with an isotropic shell, beam and orthotropic shell elements representing the outmost resin, interlaminar resin and glass fiber cloth, respectively. The proposed model was applied to the failure progress analysis under three-point ben...

A far-field airborne radar (FAR) nondestructive testing (NDT) technique integrating inverse synthetic aperture radar (ISAR) measurements and a backprojection algorithm for the condition assessment of glass fiber reinforced polymer (GFRP)–wrapped concrete structures is proposed. The method is directed toward the detection of near-surface defects and delaminations located in the vicinity of GFRP–...

The axial compressive strength of unidirectional FRP made by pultrusion is generally quite lower than its axial tensile strength. This fact decreases the advantages of FRP as main load bearing member in engineering structure. A theoretical iterative calculation approach was suggested to predict the ultimate axial compressive stress of the combined structure and analyze the influences of geometr...