Solar cells based on a heterojunction between crystalline silicon and the organic polymer PEDOT:PSS were fabricated at temperatures < 100oC by spin-coating. The Si/PEDOT interface blocks electrons in n-type silicon from moving to an anode and functions as a low-temperature alternative to diffused p-n junctions. Reverse recovery measurements were used to show that current in the device is primar...

In this paper, heterojunction nanowires of Ni-Se are fabricated via template-assisted electrodeposition process. Nanowires are characterized by scanning electron microscopy (SEM), Energy dispersive X-Ray Spectroscopy (EDS), X-ray diffractometry and electrical transport studies. SEM photographs reveal the uniform and dense growth of Ni-Se nanowires. X-ray diffraction pattern shows the crystallin...

The efficiency enhancement mechanism of the alkali-treated Si nanowire (SiNW) solar cells is discussed and analyzed in detail, which is important to control the useful photovoltaic process. All the results demonstrate that the photovoltaic performance enhancement of alkali-treated SiNW device steps from the formation of the good core-shell heterojunction, which consequently enhances the junctio...

Related Articles A comparative study of ultraviolet photoconductivity relaxation in zinc oxide (ZnO) thin films deposited by different techniques J. Appl. Phys. 111, 102809 (2012) Effect of defect bands in β-In2S3 thin films J. Appl. Phys. 111, 093714 (2012) Photovoltaic properties of the p-CuO/n-Si heterojunction prepared through reactive magnetron sputtering J. Appl. Phys. 111, 084507 (2012) ...

In this work, we study electron transport across the heterojunction interface of epitaxial few-layer graphene grown on silicon carbide and the underlying substrate. The observed Schottky barrier is characterized using current-voltage, capacitance-voltage and photocurrent spectroscopy techniques. It is found that the graphene/SiC heterojunction cannot be characterized by a single unique barrier ...

X-ray photoelectron spectroscopy has been used to measure the valence band offset of the InN/BaTiO3 heterojunction. It is found that a type-I band alignment forms at the interface. The valence band offset (VBO) and conduction band offset (CBO) are determined to be 2.25 ± 0.09 and 0.15 ± 0.09 eV, respectively. The experimental VBO data is well consistent with the value that comes from transitivi...

This paper presents an improved InGaP/GaAs heterojunction bipolar transistor (HBT) model based on the Vertical Bipolar Inter-Company (VBIC) model. New transport current expression is proposed by considering the heterojunction effect. Collector capacitance is developed due to the mobile charge modulation, and the transit time formula is improved to account for electron velocity variation with th...

Silicon nanocrystal (Si-nc) down-conversion is demonstrated to enhance organic and hybrid organic/inorganic bulk heterojunction solar cells based on PTB7:[70]PCBM bulk heterojunction devices. Surfactant free surface-engineered Si-ncs can be integrated into the device architecture to be optically active and provide a means of effective down-conversion of blue photons (high energy photons below ∼...

Organic-inorganic hybrid photovoltaics are beginning to show significant promise as a low cost highly efficient route towards renewable energy generation. Of the hybrid architectures available, carbon nanotube incorporated organic photovoltaics is considered to be among the most promising. Herein, the optical and electronic effects of localizing multiwalled carbon nanotubes in the donor polymer...

Vertically aligned single-crystal ZnO nanorods have been successfully fabricated on semiconducting GaN, Al0.5Ga0.5N, and AlN substrates through a vapor-liquid-solid process. Near-perfect alignment was observed for all substrates without lateral growth. Room-temperature photoluminescence measurements revealed a strong luminescence peak at approximately 378 nm. This work demonstrates the possibil...