This paper focuses on a new polyaniline-derived non-precious cathode catalyst with high oxygen-reduction activity, verified in electrochemical and fuel cell testing. The rotating disk (RDE) onset and half-wave potential (E1⁄2) of oxygen reduction were measured at 0.90 V and 0.77 V, respectively. Rotating ring-disk electrode (RRDE) study revealed very good selectivity in the fourelectron reducti...

Nowadays, application of cermet coatings deposited by High-Velocity Oxygen-Fuel (HVOF) has received considerable attention in a variety of industries. Carbide coatings have high surface roughness, so it is essential to grind the coated surface. The present investigation studied the effect of simultaneous changes in the grinding parameters including the depth of cut, feed rate and cutting sp...

The results of experimental studies of organic dust detonation in the presence of chemically inert particles are presented. Tests were carried out using a vertical detonation tube, and direct streak pictures showing the flame acceleration and pressure and temperature records were obtained. Flax dust, dispersed in an oxygen atmosphere, was used as the fuel, and two kinds of quartz sand were intr...

Chemical-Looping Combustion (CLC) is a two-step combustion process that produces a pure CO2 stream, ready for compression and sequestration. A CLC system is composed by two reactors, an air and a fuel reactor, and an oxygen carrier circulating between the reactors, which transfers the oxygen necessary for the fuel combustion from the air to the fuel. This system can be designed similar to a cir...

From the literature, it is known that due to their glass formation tendency, it is not possible to deposit fully-crystalline silicate coatings when the conventional atmospheric plasma spraying (APS) process is employed. In APS, rapid quenching of the sprayed material on the substrate facilitates the amorphous deposit formation, which shrinks when exposed to heat and forms pores and/or cracks. T...

Spherical catalytic micromotors fabricated as described in Wheat et al. [Langmuir 26, 13052 (2010)] show fuel concentration dependent translational and rotational velocity. The motors possess short-time and long-time diffusivities that scale with the translational and rotational velocity with respect to fuel concentration. The short-time diffusivities are two to three orders of magnitude larger...

Presented in the article are design and operation principles of ion sensors intended for detecting propagating reaction fronts, deflagration/detonation mode, apparent subsonic/supersonic propagation velocity front, duration heat release by measuring current reactive medium. The electrical circuits without with intermediate amplifiers, short response time high sensitivity, as well very wide dyna...

computational fluid dynamics analysis was employed to investigate the radial flow field patterns of proton exchange membrane fuel cells (pemfc) with different channel geometries at high operating current densities. 3d, non-isothermal was used with single straight channel geometry. our study showed that new generation of fuel cells with circle stack with the same active area and inlet area gave ...

in this research the simulation of an air independent proton exchange membrane fuel cell (pemfc) propulsion system was taken into consideration. the system consists of several parts including pem fuel cell stack, metal hydride and liquid oxygen (lox) tanks, and also pre-heaters of oxygen and hydrogen gases along with other heat exchangers, to ensure proper operation of system. the heat recovery...