A simple design technique for separable denominator circularly symmetric lowpass filter is described. In this technique an FIR filter function with sharp cutoff characteristic and amenable to efficient_ implementation is used to meet the transition band requirement of the filter and to provide approximately circularly Symmetric passband. However, the FIR filter nas high transmission in stopband...

The special impacting filter (SIF) with IIR structure has been used to demodulate ABSK signals. The key points of SIF, including the resonance circuit's high Q value and the "slope-phase discrimination" character of the filter sideband, are demonstrated in the paper. The FIR narrow-band bandpass filtering system, which can also provide the impact-filtering effect, is proposed. A dual carrier sy...

It is well-known that certain non bandlimited signals such as splines can be reconstructed from uniformly spaced samples similar to bandlimited signals. This usually requires noncausal IIR filters. We revisit this result and consider extensions such as derivative sampling theorems and pulse sampling theorems. It turns out that spline-like signals can often be reconstructed from joint sampling o...

In this paper, the two dimensional (2D) digital notch filter design problem is investigated. First, we develop a simple algebraic method for 2D IIR notch filter design. This approach not only has closed-form transfer function but also satisfies bounded input bunded output ( ~ 1 ~ 0 ) stability condition. Next, we use Lagrange multiplier method to design 2D FIR notch filters. This design is opti...

www.xilinx.com 1 © 2009 Xilinx, Inc. All rights reserved. XILINX, the Xilinx logo, and other designated brands included herein are trademarks of Xilinx, Inc. All other trademarks are the property of their respective owners. A large percentage of filters implemented in the digital domain are Finite Impulse Response (FIR) filters. These filters are used over a wide range of sample rates and are w...

This paper proposes a novel method for designing two-channel and M-channel causal stable IIR PR filter banks using cosine modulation. In particular, we show that the PR condition of the two-channel IIR filter banks is very similar to the two-channel FIR case. Using this formulation, it is relatively simple to satisfy the PR condition and to ensure that the filters are causal stable. Using a sim...

FIR filters can achieve linear phase, but for a given set of specifications require much higher order than the corresponding IIR design, especially when the transition band is very narrow. This paper reviews the original and some further developments of the IFIR technique, which is used to lower the complexity of a FIR filter.

This paper proposes a new method of a pole controlled IIR adaptive digital filter (ADF) with a preceded FIR section, which consists of parallel connected second order IIR filters controlled by each inherent identification error. The FIR part works to identify a flat delay and responses resulting from poles near the origin of z-plane. On the other hand, the IIR part identifies poles near the uni...

The FIR-based reverberators, which convolve the input sequence with an impulse response modelling the concert hall, have better quality compared to the IIR-based approach. However, the high computational complexity of the FIR-based reverberators limits the applicability to most cost-oriented system. This paper introduces a method that uses perceptual criterion to reduce the complexity of convol...

In this paper, finite impulse response (FIR) smoothers are proposed for discrete-time systems. The proposed FIR smoother is designed under the constraints of linearity, unbiasedness, FIR structure, and independence of the initial state information. It is also obtained by directly minimizing the performance criterion with unbiased constraints. The approach to the MVF smoother proposed in this pa...