Infrared (IR) reflectivity spectra of nominally pure Pb(Zr1-xTix)O3 ceramics with different Ti/Zr concentration (x = 0.42–0.58) were measured and evaluated, along with the time-domain terahertz transmittance spectra in the temperature range 10 K–900 K. The temperature dependence of the low-frequency vibrations, related to Pb atoms, was analyzed in terms of two overdamped modes—a soft mode and a...

This paper presents optical characterization of a first-generation SiO(2) optrode array as a set of penetrating waveguides for both optogenetic and infrared (IR) neural stimulation. Fused silica and quartz discs of 3-mm thickness and 50-mm diameter were micromachined to yield 10 × 10 arrays of up to 2-mm long optrodes at a 400-μm pitch; array size, length and spacing may be varied along with th...

Cryogen spray cooling (CSC) is a technique employed to reduce the risk of epidermal damage during dermatologic laser surgery. However, while CSC protects the epidermis from non-specific thermal damage, it might reduce the effective fluence reaching the target chromophore due to scattering of light by the spray droplets and subsequent water condensation/freezing on the skin surface. The objectiv...

A novel scatterometry method, based on broadband measurements of reflectance and transmittance spectra is presented. For the first time Rigorous Coupled Wave Analysis (RCWA) algorithm is applied to the analysis of the transmittance spectra for the determination of trench depths, critical dimensions, profiles, film thicknesses, and optical properties (n and k spectra from 190 – 1000 nm) of phase...

The BaSnO3/Ag/BaSnO3 multilayer structure was designed and fabricated on a quartz glass by magnetron sputtering, followed by an annealing process at a temperature from 150 to 750 °C in air. In this paper, we investigated the influence of the annealing temperature on the structural, optical, and electrical properties of the multilayers and proposed the mechanisms of conduction and transmittance....

PURPOSE The objective of this study was to compare the light transmittance of zirconia in different thicknesses using various light curing units. MATERIALS AND METHODS A total of 21 disc-shaped zirconia specimens (5 mm in diameter) in different thicknesses (0.3, 0.5 and 0.8 mm) were prepared. The light transmittance of the specimens under three different light-curing units (quartz tungsten ha...

This study explored the feasibility of near-infrared (NIR) quantitative and qualitative models for soybean inorganic phosphorus (Pi), which is complementary to phytic acid, a component of nutritional and environmental importance. Spectra, consisting of diffuse reflectance (1100-2500 nm) of ground meal and single-bean transmittance (600-1900 nm) of whole seed, were collected on 191 recombinant i...

Recent developments in rendering have provided very realistic images. However, these images rarely show organic objects. We believe that one of the main difficulties of rendering these objects realistically is the lack of reflectance and transmittance models oriented to organic materials. In this paper an algorithmic reflectance and transmittance model for plant tissue oriented to computer grap...

Accepted: November 28, 1984 The work describes the methods and procedures used to determine the wavelengths of minimum transmittance of holmium oxide in perchloric acid solution. Measurements of spectral transmittance of the solutions were made by means of a high precision spectrophotometer over the wavelength range 200 nm to 680 nm. The wavelength scale accuracy of this instrument was verified...

We theoretically investigate the defect mode transmittance of light waves in superconductor–semiconductor photonic crystals and its pressure-sensing dependence. The crystal is composed alternating superconducting semiconducting slabs a locates at center this structure. Two trapezoid waveguides are fixed both sides crystal, which induces hydrostatic pressure applied beams transmitted simultaneou...