A light attenuation sensor system (LASS) for measurements in waters is described in this paper. The LASS records irradiance at multiple levels in the water column to provide a measure of the diffuse light attenuation coefficient which is strongly affected by suspended sediment. Dimensional analysis and geometric optical theory are used to relate the irradiance attenuation to sediment properties...

The main objective of this research work is to find the natural frequency and mode shape of truck transmission housing. Truck transmission housing or gearbox transmission casing is subjected to vibration induced by the excitation forces transmitted to the casing through bearings. So it is required to find the natural frequency for the accurate prediction of housing life and prevent it from frac...

Chatter vibrations, occurring during cutting process, cause vibration between the cutting tool and workpiece, which deteriorates surface roughness and reduces tool life. The purpose of this study is to investigate the influence of cutting parameters and tool construction on surface roughness and vibration in turning of aluminum alloy AA2024. A new design of cutting tool is proposed, which is fi...

The main objective of this article is to present the semi-active vibration control using an electro-rheological fluid embedded sandwich structure for a cantilever beam. ER fluid is a smart material, which cause the suspended particles polarize and connect each other to form chain. The stiffness and damping coefficients of the ER fluid can be changed in 10 micro seconds; therefore, ERF is suitab...

The effect of sitting posture on human biomechanical response to whole-body vibration (WBV) was investigated in this work. Two popular sitting postures in the construction industry, standard back supported and bent forward (unsupported), were considered in this study (N = 4). A six-degree-of-freedom man-rated vibration platform, a twelve-camera Vicon motion capture system, three AMTI force plat...

The effect of local drop of wall stiffness in pressurized waterways on the pressure wave speed and the wave attenuation during transients is investigated experimentally. A new signal-processing procedure to identify the presence of a weak reach is introduced and validated by physical experimentation based on assessing the pressure and vibration records acquired at both ends of a multi-reach ste...

Reciprocating diaphragm micro-pumps are the most common type among indirectly–driven micro-pumps. They operate by reciprocating the diaphragm with associated check valves. This paper addresses the Hydroelastic vibration of circular elastic diaphragm interacting with the incompressible and inviscid liquid inside the cylindrical chamber with a central discharge opening. Taking into account axisym...

There is a worldwide interest in the proper design of embankment dams to resist earthquake loadings. For the first time in Iran, a complete ambient vibration survey due to low-level loads such as wind, machinery activities, low level tectonic activities, and water exit from bottom outlet was performed on Marun embankment dam. These kinds of ambient vibration tests are suitable for manifesting t...