This paper presents buckling studies made on skew plates using finite element. The effects of the skew angle, aspect ratio, length-to-thickness-ratio, fibre orientation angle, and numbers of layers in the laminate and laminate sequence on the critical buckling load factor (Kcr) of antisymmetric composite laminates have also been presented. The critical buckling load factor (Kcr) is found to inc...

This paper presents buckling studies made on skew plates using finite element. The effects of the skew angle, aspect ratio, length-to-thickness-ratio, fibre orientation angle, and numbers of layers in the laminate and laminate sequence on the critical buckling load factor (Kcr) of antisymmetric composite laminates have also been presented. The critical buckling load factor (Kcr) is found to inc...

Low-speed wind energy conversion systems generally use Carbon Fiber Reinforced Plastic (CFRP) and Glass Fiber Reinforced Plastic (GFRP) as materials for rotor blade because these materials are light weight and hard but expensive. Layer Laminated Bamboo Composite (LLBC) is a bio-composite with bamboo base material which is abundant material and has a relatively lower price. This study investigat...

Unlike well-investigated polymer-based soft actuators such as gel, Ionic Polymer-Metal Composite, conducting polymer, a CFRP-based polymeric laminate possesses quite distinguished properties. It was previously reported that a CFRP-PVC laminate exhibited two-way deflection in accordance with environmental temperature, but it could not exhibit symmetric deflection because of its asymmetric struct...

In recent years, the improvement of properties of natural fibre reinforced laminates over the pure polymeric matrix has been thoroughly investigated with the aim of providing a possible replacement of E-glass fibre reinforced composites for some large-volume applications. In the present study, the properties of a jute/polyester laminate are compared with those yielded by two E-glass fibre woven...

Thermography is a non-contact NDT technique for inspection of materials in wide application areas, including corrosion detection in metals, and delamination, porosity and moisture detection in composite materials. Composites often are highly anisotropic in nature. This anisotropy coupled with low thermal diffusivity in thickness direction, severely restricts detection of deeper defects in compo...

Babu ska and Oh introduced a new approach, called the method of auxiliary mapping (MAM), that can effectively handle singularities in the framework of the p-version of the FEM. In this paper, this new approach is generalized so that it can yield highly accurate energy release rates for the cracks in composite materials. The results obtained by this method are more accurate than those obtained b...

Carbon fibre epoxy matrix composite honeycombs have been fabricated by slotting, assembling and adhesively bonding composite laminate sheets with various fibre architectures. Their out-of-plane compressive and in-plane shear responses were measured as a function of relative density, ratio of the cell height to width and the number of cells in the specimen. The measurements indicate that the res...

Piezoelectric wafer active sensors (PWAS) are lightweight and inexpensive transducers that enable a large class of structural health monitoring (SHM) applications such as: (a) embedded guided wave ultrasonics, i.e., pitch-catch, pulse-echo, phased arrays; (b) high-frequency modal sensing, i.e., electro-mechanical impedance method; and (c) passive detection. The focus of this paper is on the cha...

School children often encounter traumatic injuries like a crown fracture. They create serious functional, esthetic and psychological problems. Achievement of promising restoration that preserves its aesthetics and strength is the greatest desire for both children and their parents and is a challenging task for the dentist. The restorative options in these cases usually include composite resin a...