Polyvinyl alcohol (PVA)-stabilized graphene nanosheets (GNS) of lateral dimension (L) ~1 μm are obtained via liquid phase exfoliation technique to prepare its composites in the PVA matrix. These composites show low levels of reinforcements due to poor alignment of GNS within the matrix as predicted by the modified Halpin-Tsai model. Drawing these composites up to 200 % strain, a significant imp...

PLA biocomposites were prepared using three corn cob fractions and a wood fiber as reference. The composites were characterized by tensile testing, scanning electron microscopy (SEM) and polarization optical microscopy (POM). Micromechanical deformation processes were followed by acoustic emission measurements. The different strength of the components was proved by direct measurements. Two cons...

This article proposes a new theory for predicting the crack bridging performance of random short fibers involved in cementitious composites. The current theoretical model for estimating crack bridging performance of Random Short Fiber Reinforced Cement Composites (RSFRCC) under tension is limited to specific constituent properties: friction dominant fiber-matrix interface and complete fiber pul...

Metal matrix composites have been widely used in industries, especially aerospace industries, due to their excellent engineering properties. However, it is difficult to machine them because of the hardness and abrasive nature of reinforcement elements like silicon carbide particles (SiCp).In the present study, an attempt has been made to investigate the influence of spindle speed (N), feed rate...

The main problem with cement composites is that they have structural defects, including cracks, holes, and a disordered morphology, which significantly affects their strength and durability. Therefore, the construction of cement composites with defect-free structures and high strength and long durability is an important research topic. Here, by controlling the size and chemical groups of graphe...

For over a decade our group has been designing, preparing and evaluating bioactive, remineralizing composites based on amorphous calcium phosphate (ACP) fillers embedded in polymerized methacrylate resin matrices. In these studies a major focus has been on exploring structure-property relationships of the matrix phase of these composites on their anti-cariogenic potential. The main challenges w...

A new generation of bone cement with mechanical properties significantly higher than that of commercially available acrylic bone cements are strongly desired in order to ensure the long term clinical performance of the cemented arthroplasty. Currently commercial acrylic bone cement formulations contain micron-sized particles of either BaSO4 or ZrO2 to provide radiopacity, however these particle...

the principal effects of mass degradation on polymer matrix composites (pmcs) are the decay of mechanical properties such as strength, elongation, and resilience. this degradation is a common problem of the pmcs under thermal cycling conditions. in this article, composite degradation was investigated by measurement of total mass loss (tml) using the taguchi approach. thermal cycling tests were ...

to achieve an excellent thermal-mechanical performance of cmcs, it is necessary to analyze and design the thickness of the multi-layered interphases for an optimized trs distribution. an optimization was performed with a new version of the particle swarm optimization, the bsg-starcraft radius pso linked to a finite element software.

In this paper, the microstructure, the room-temperature and high-temperature tensile mechanical properties of monolithic TA15 alloy and TiB whisker-reinforced TA15 titanium matrix composites (TiBw/TA15) fabricated by vacuum hot-pressing sintering were investigated. The microstructure results showed that there were no obvious differences in the microstructure between monolithic TA15 alloy and Ti...