Selective Ga + ion implantation and miring by focused ion beam exposure and subsequent wet chemical etching is used to fabricate micro/nanomechanical elements in Si. Freestanding elements with a ~ 30 nm membrane thickness are made by controlled selective underetching between unexposed and exposed areas. Ultrahigh-frequency cantilever beams have been made with resonances in the tens of MHz range...

A room temperature scanning Hall probe microscope system utilizing GaAs/AlGaAs and bismuth micro-Hall probes was used for magnetic imaging of ferromagnetic domain structures on the surfaces of crystalline thin film garnets and permanent magnets. The Bi micro-Hall probes had dimensions ranging between 0.25 and 2.8 microm2 and were fabricated using a combination of optical lithography and focused...

AIM To present a newly developed cone beam computerized tomography system (3DX Micro-CT) and its application in endodontic surgery. SUMMARY Cone beam CT has attracted considerable attention as a new diagnostic imaging technique in dentistry. The assessment of fractured endodontic instruments and the planning of endodontic surgery present challenges that conventional radiography cannot meet su...

A method for producing optical structures using rotationally symmetric pyramids is proposed. Two-dimensional structures can be achieved using acute prisms. They form by multi-beam interference of plane waves that impinge from directions distributed symmetrically around the axis of rotational symmetry. Flat-topped pyramids provide an additional beam along the axis thus generating three-dimension...

Three-beam interference lithography represents a technology capable of producing two-dimensional periodic structures for applications such as micro- and nanoelectronics, photonic crystal devices, metamaterial devices, biomedical structures, and subwavelength optical elements. In the present work, a systematic methodology for implementing optimized three-beam interference lithography is presente...

In this paper, a size-dependent formulation for the Bernoulli-Euler beam is developed based on a new model of couple stress theory presented by Hadjesfandiari and Dargush. The constitutive equation obtained in this new model, consists of only one length scale parameter that is capable of capturing the micro-structural size effect in predicting the mechanical behavior of the structure. Having on...

Observing micro-organisms with depth-resolving capability is important in optical microscopy for biomedical sciences and industries. We demonstrate the fabrication use of a two-photon polymerized micro-axicon lens that generates self-reconstructing pencil-like Bessel beam light-sheet fluorescence (LSFM), providing 3D internal structures micro-organisms. The fabricated SU-8 100 µm diameter trans...

Electron beam welding has shown a remarkable job in the space industry for welding of components. It is performed under a vacuum environment that eliminates foreign matter such as hydrogen, oxygen, and other gases. Joining of similar and dissimilar materials is the main advantage of electron beam welding with high depth to width ratio as well as sharp focus at the point where parts are to be we...

We show that planar nanopatterned thin films on standard polycarbonate (PC) compact discs (CD) can be micro-shaped in a non-contact manner via direct e-beam exposure. The shape of the film can be controlled by proper selection of the e-beam parameters. As an example of application, we demonstrate a two-dimensional (2D) array of micro-lenses/reservoirs conformally covered by an Al 2D nanohole ar...

In terahertz (THz) materials science, imaging by scanning prevails when low power THz sources are used. However, the application of array detectors operating with high power THz sources is increasingly reported. We compare the imaging properties of four different array detectors that are able to record THz radiation directly. Two micro-bolometer arrays are designed for infrared imaging in the 8...