It has been found from the literature review that the ANFIS-based maximum power point tracking (MPPT) techniques are very fast and accurate in tracking the MPP at any weather conditions, and they have smaller power losses if trained well. Unfortunately, this is true in simulation, but in practice they do not work very well because they do not take aging of solar cells as well as the effect of d...

Abstract: In modern wind farms, maximum power point tracking (MPPT) is widely implemented. Using the MPPT method, each individual wind turbine is controlled by its pitch angle and tip speed ratio to generate the maximum active power. In a wind farm, the upstream wind turbine may cause power loss to its downstream wind turbines due to the wake effect. According to the wake model, downstream powe...

– This paper presents the optimization of a photovoltaic (PV) water pumping system using maximum power point tracking technique (MPPT). The optimization is suspended to reference optimal power. This optimization technique is developed to assure the optimum chopping ratio of buck-boost converter. The presented MPPT technique is used in photovoltaic water pumping system in order to optimize its e...

Nowadays, it can be observed that Wireless Sensors Networks (WSN) are taking increasingly vital roles in many applications, such as building energy monitoring and control, which is the focus of the work in this paper. However, the main challenging issue with adopting WSN technology is the use of power sources such as batteries, which have a limited lifetime. A smart solution that could tackle t...

This paper describes the design of a voltage based maximum power point tracker (MPPT) for photovoltaic (PV) applications. Of the various MPPT methods, the voltage based method is considered to be the simplest and cost effective. The major disadvantage of this method is that the PV array is disconnected from the load for the sampling of its open circuit voltage, which inevitably results in power...

In this paper, an improved maximum power point (MPP) tracking (MPPT) with better performance based on voltage-oriented control (VOC) is proposed to solve a fastchanging irradiation problem. In VOC, a cascaded control structure with an outer dc link voltage control loop and an inner current control loop is used. The currents are controlled in a synchronous orthogonal d, q frame using a decoupled...

The electricity generations of photo voltaic (PV) panels are strongly related with insolation and temperature. The insolation and temperature are not stable, since the electricity generations of the PV panels are not stable. In PV systems, insolation and temperature continuous vary. Therefore, the maximum power point tracking (MPPT) techniques are used to give the highest power to the loads/bat...

Variable speed wind turbines (VSWTs) usually adopt a maximum power point tracking (MPPT) method to optimize energy capture performance. Nevertheless, obtained performance offered by different MPPT methods may be affected by the impact of wind turbine (WT)’s inertia and wind speed characteristics and it needs to be clarified. In this paper, the tip speed ratio (TSR) and optimal torque (OT) metho...

This thesis proposes a new maximum power point tracking (MPPT) method for photovoltaic (PV) systems using Kalman filter. The Perturbation & Observation (P&O) method is widely used due to its easy implementation and simplicity. The P&O usually requires a dithering scheme to reduce noise effects, but the dithering scheme slows the tracking response time. Tracking speed is the most important facto...

Nowadays research focus is towards the Variable speed power generation in instead fixed speed power generation in wind energy conversion system. With variable speed, there will be 20-30% increase in the energy capture compared to the fixed-speed operation. For Variable speed wind energy conversion system the maximum power point tracking (MPPT) is a very important requirement in order to maximiz...