نتایج جستجو برای: multiple interface cracks dissimilar mediums mixed mode fracture stress
تعداد نتایج: 1839037 فیلتر نتایج به سال:
Fatigue crack growth rate depends not only on the load amplitude, but also on the morphology of crack path. The strain energy density theory has the ability to analyze crack growth rate. A strain energy density crack growth model is proposed. It can predict the lifetime of fatigue crack growth for mixed mode cracks while an equation for mode I crack is also obtained. The validity of the model i...
We monitored AEs during micro-indentation and pulse laser spallation test of CVD diamond film deposited on sintered SiC, and classified the fracture type by Lamb wave AE analysis. In the indentation test with a Rockwell sphere indenter, we observed Hertz ring cracks and simultaneously detected AEs from Mode-I fracture. Crack types were classified from polarity distribution of the first arrival ...
By partitioning the total stresses in a damaged composite into either mechanical and residual stresses or into initial and perturbation stresses, it was possible to derive several exact results for the energy release rate due to crack growth. These general results automatically include the effects of residual stresses, traction-loaded cracks, and imperfect interfaces. By considering approximate...
In this work, fracture behavior of multilayered unidirectional graphite/epoxy composite (T800/3900-2) materials is investigated. Rectangular coupons with a single-edged notch are studied under geometrically symmetric loading configurations and impact loading conditions. The notch orientation parallel to or at an angle to the fiber orientation is considered to produce mode-I or mixed-mode (mode-...
Abstract: The solution to problem of an orthotropic long cylinder subjected to torsional loading is first obtained by means of separation valuables. The cylinder is twisted by two lateral shear tractions and the ends of the cylinder surface of the cylinder are stress-free. First, the domain under consideration is weakened by an axisymmetric rotational Somigliana ring dislocation. The dislocatio...
Successful arrest and retardation of fatigue cracks is achieved with an in situ self-healing epoxy matrix composite that incorporates microencapsulated dicyclopentadiene (DCPD) healing agent and Grubbs first generation Ru catalyst. Healing agent is released into the crack plane by the propagating crack, where it polymerizes to form a polymer wedge, generating a crack tip shielding mechanism. Du...
Numerical methods such as boundary element and finite element methods are widely used for the stress analysis in solid mechanics. This study presents boundary element method based on the displacement discontinuity formulation to solve general problems of interaction between hydraulic fracturing and discontinuities. The crack tip element and a higher order boundary displacement collocation techn...
This paper describes the development of a dual-actuator loading device that was then used to apply asymmetric, transverse end-displacements laminated beam specimens (silicon/epoxy/silicon) over range separation rates. Measurements reaction forces, as well load-point displacements and rotations, were determine normal tangential components crack tip corresponding J-integral. made possible because...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید