The CuO nano particles were synthesized from copper sulfate pentahydrate aqueous solution under the low hydrothermal condition at 80°C.The average crystallite size was calculated from De-Bye Scherrer’s equation. SEM/EDS,XRD were used to characterize the structure features of the product. FTIR spectra confirmed the adsorption of ammonia on the surface of the CuO nanoparticles. In addition, UV-vi...

In the present time study,dried activated sludge(DAS) and dried activated nano sludge(DANS) was used for the removal of Cu(II) from aqueous solution in a fixed-bed reactor. The effect of important parameters including the flow rate and bed height were examined. Dried activated nano sludge column regeneration using 1 M concentration of HNO3 has been studied.The Thomas model was used for the math...

An all-metal lateral spin-valve structure has been fabricated with a medial Copper nano-ring to split the diffusive spin-current path. We have demonstrated significant modulation of the non-local signal by the application of a magnetic field gradient across the nano-ring, which is up to 30% more efficient than the conventional Hanle configuration at room temperature. This was achieved by passin...

cu2o nanoparticles were synthesized by thermal treatment in liquid paraffin without any inert gas protection using nano structures of schiff base copper (ii) complex (1) as precursor. liquid paraffin was used as solvent and reductant. span 80 was applied to control the morphology of cuprous oxide nanoparticles. the nano structure of the complex was characterized by x-ray diffraction measurement...

copper sulfate was used as a precursor to prepare cuo nanoparticles in reverse micelles (o/w microemulsion).  this is a technique which allows the preparation of ultrafine metal oxide nanoparticles within the size ranging from 50 to 60 nm. the preparation of nano copper (ii) oxide studied was investigated in the inverse microemulsion system. therefore the nucleation of metal particles proceeds ...

One distinct concentration of copper ions was embedded into the silica matrix to xerogel form using copper source Cu(NO3)2∙3H2O. The xerogel samples were prepared with using hydrolysis and condensation reactions of TetraEthyl Ortho-Silicate (TEOS) by the sol-gel method. In this investigation, new molar ratio of H2</su...

In this study, molybdenum-copper/alumina nano composite was synthesized with mechano-chemical method using high energy planetary ball milling. The molybdenum oxide, copper oxide and aluminum powder were used as starting materials and reaction appeared to occur through a rapid combustion reaction process. The evaluation of powder particles after different milling times was studied by X-ray diffr...

Powder metallurgy has been used for the manufacture of fully dense, which have not reacted composites consisting of a matrix of copper containing 50 -60 vol% particles with negative thermal ZrW2O8 expansion. On cycling between 25 and 300°C, the compounds showed coefficients thermal expansion which varies rapidly with temperature and significantly larger than expected by theory. Improvements in ...

Surfactant-free, single-nano-sized copper nanoparticles (Cu NPs) (size: about 2 nm) were prepared by the DMF reduction method. The Cu NPs showed high catalytic activity (with a turnover number (TON) of up to 2.2 × 10(4)) in Ullmann-type cross-coupling of aryl halides with phenols under ligand-free conditions.

Low carbon ferritic steel alloyed with Ti, Mo and Cu was hot rolled and interrupt cooled to produce nano-sized precipitates of copper and (Ti,Mo)C carbides. The steel had a tensile strength of 840 MPa, an increase in yield strength of 380 MPa over that of the plain carbon steel and reasonable ductility. Transmission electron microscopy and small angle neutron scattering were used to characteriz...