The influence of TiO2 nano-particles (nano-TiO2) was studied relative to the mechanical and optical properties of CMYK printed paperboard after coating with a UV-curable varnish. Commercial duplex paperboard (glazed grayback paperboard, 230 g/m) was printed with a CMYK offset printing process. Board samples were coated with a nano-TiO2 modified UV-curable varnish at four treatment levels (0, 0....

The zincZeolite Socony Mobil-Five nano-particles (Zn-ZSM-5 NPs) composite was prepared and applied successfully as a new coating material to improve the corrosion resistance of steel. The corrosion type and quality of both pure zinc and our new coating material, Zn-ZSM-5 NPs, were studied using mass loss, impedance and electro-chemical polarization techniques in a sodium chloride solution. Obta...

Previous studies have shown no, or very limited, skin penetration of metal oxide nanoparticles following topical application of sunscreens, yet concerns remain about their safety compared to larger particles. Here, we assessed the comparative dermal absorption of a traceable form of Zn ((68)Zn) from (68)ZnO nano-sized and larger particles in sunscreens. Sunscreens were applied to the backs of v...

objective: nano components are today’s new wonder material. however, the safety or toxicity of these components in humans is not yet clear. in a previous study we indicated that nano zno (nzno) has a stronger anxiolytic effect compared to the conventional zno (czno). the present study was designed to evaluate the intraperitoneal administration of an opioidergic receptor agonist and antagonist o...

This paper compares the properties of iPP based composites and PLA based biocomposites using 5% of ZnO particles or ZnO particles coated with stearic acid as filler. In particular, the effect of coating on the UV stability, thermostability, mechanical, barrier, and antibacterial properties of the polymer matrix were compared and related to the dispersion and distribution of the loads in the pol...

BACKGROUND The release of heavy metal-containing nanoparticles (NP) into the environment may be harmful to the efficacy of beneficial microbes that function in element cycling, pollutant degradation and plant growth. Nanoparticles of Ag, CuO and ZnO are of interest as antimicrobials against pathogenic bacteria. We demonstrate here their antimicrobial activity against the beneficial soil microbe...

the synthesis of titania via sol-gel method has been widely studied. in the present work, titania was deposited onto a titanium substrate via sol-gel method. different processing parameters such as the repetition number of dipping/heat treatment process and dipping time have been studied to obtain the homogenous titania coating. phase and microstructural evaluation of the powder and coating sam...

The potential of nanofluids for the improvement of heat transfer coefficient in various heat exchangeequipment has been considered and studied as a major application during recent decades. In this research,heat transfer coefficient of ZnO, TiO2 and ZnO/TiO2 nanofluids in a shell and tube heat exchanger has beenstudied experimentally. ZnO nanoparticle was synthesized through pre...

We propose a novel synthetic route by combining imprinting transfer of a Sb-doped SnO2 (ATO)-ZnO composite micrograting pattern (MP), i.e., microstrip lines, on a sensor substrate and subsequent hydrothermal growth of ZnO nanowires (NWs) for producing a hierarchical ZnO NW-loaded ATO-ZnO MP as an improved chemo-resistive sensing layer. Here, ATO-ZnO MP structure with 3-μm line width, 9-μm pitch...

For a full estimation of the risk related with the presence of engineered nanoparticles (ENPs) in the environment, the use of the current ecotoxicological methods may prove insufficient. In the study presented herein, various methods of assessment of ecotoxicity were applied to compare the phytotoxicity of three ENPs: nano-ZnO, nano-TiO2 and nano-Ni. The toxicity was assayed both for aqueous so...