Microstructured composite beams reinforced with complex three-dimensionally (3D) patterned nanocomposite microfilaments are fabricated via nanocomposite infiltration of 3D interconnected microfluidic networks. The manufacturing of the reinforced beams begins with the fabrication of microfluidic networks, which involves layer-by-layer deposition of fugitive ink filaments using a dispensing robot,...

S. Ponmani and C. Udayasoorian Abstract -A new class of nano scale zero valent iron (nZVI) particles supported on activated carbon (AC) were synthesized and the feasibility of using nanocomposite (AC+nZVI) for the removal of Cr(VI) in water was investigated through laboratory batch test. Nanocomposite was synthesized by impregnating carbon with ferrous sulfate followed by chemical reduction wit...

A novel nanocomposite has been developed using extracted cellulose from marine algae coated with conductive polypyrrole and graphene nanoplateletes. The nanocomposite fabricated via in situ polymerization was used as an electrode for a supercapacitor device. The nanocomposite material has been electrochemically characterized using cyclic voltammetry to test its potential to super-capacitive beh...

Two types of Aluminum nitride (AlN) based ceramic nanocomposite with multifunctionality were investigated to improve machinability or electrical conductivity of AlN ceramics with high thermal conductivity. The AlN/BN nanocomposite was fabricated by pressureless sintering AlN-BN composite powder, which was prepared by reducing and heating AlN particles coated with a mixture of boric acid, urea a...

Nanostructured materials lie at the heart of fundamental advances in efficient energy storage and/or conversion, in which surface processes and transport kinetics play determining roles. Nanocomposite materials will have a further enhancement in properties compared to their constituent phases. This Review describes some recent developments of nanocomposite materials for high-performance Li-ion ...

This paper reports a hybrid nanocomposite of well-aligned zinc oxide (ZnO) nanorods on cellulose and its strain sensing behavior. ZnO nanorods are chemically grown on a cellulose film by using a hydrothermal process, termed as cellulose ZnO hybrid nanocomposite (CEZOHN). CEZOHN is made by seeding and growing of ZnO on the cellulose and its structural properties are investigated. The well-aligne...

SiO2 coated γ-Fe2O3 nanocomposite powder has been successfully synthesized by chemical vapor condensation process and its feasibility on hyperthermic application was investigated in this study. The power loss of SiO2 coated γ-Fe2O3 nanocomposite powder which means the magnetic heating effect under alternative magnetic field was much higher than the single phase γ-Fe2O3 nano powder due to the ve...

Ag-Fe2O3 and Sn-doped Ag-Fe2O3 nanocomposite photocatalysts were optimized by scanning photoelectrochemical microscopy (SPECM) as a potential photoelectrochemical material for visible light irradiation (λ g 420 nm). The photocurrent vs potential response and the action spectra were investigated in a three-electrode cell. Among different mole ratios, the composition of nanocomposite with 50%Ag-5...

Nanocomposite films of metal nitrides such as TiN/Si3N4, TiN/BN, and CrN/AlN have attracted substantial attention as coating materials for improving hardness and saving rare metals. It is difficult to prepare composite films consisting of nitride and oxide by conventional reactive sputtering methods. Nose et al. developed a differential pumping cosputtering (DPCS) system, which can fabricate di...

A dual nanocomposite hydrogel with inorganic hybrid crosslinking was fabricated through a simultaneous sol-gel technique and free radical polymerization. Due to the multi-strengthening mechanism of the dual nanocomposite, the hydrogel was super tough and strong with a compressive stress of 32.00 MPa without rupture even at 100% strain, while it exhibited excellent fatigue resistant properties.