Background & Objectives: Nanotechnology is one of great important part of technology. Nanoparticles can be used in different applications for industrial, medical, military and personal use. The objectives of this study were preparation of Polystyrene/ZnO nanocomposite films via a simple method and investigation of antibacterial activity of them. Materials and Methods: Polystyrene/ZnO nanopartic...

the pellet-type sno2 sensor was synthesized by the solid state method and the effects of additives such as nano zno (1-12 mol %) and nano in2o3 (1-10 mol %) on the co gas sensitivity of sensor were investigated. the optimum sintering temperature was chosen 800°c because of the porosity content of the samples. the phase analysis and microstructure of the samples were studied by x-ray diffraction...

zinc oxide nanoparticles have been synthesized by chemical reaction method.  polyvinyl alcohol (pva) composite film filled with nanometric, monodispersed zinc oxide nano particles prepared by pva solution and nanozinc oxide. polymer blend with zno nanoparticle composite film has prepared by casting technique.  the property of nano composites depends greatly on the chemistry of polymer matrices....

nanocomposite of zro2/zno was prepared under ultrasonic irradiation by sol gel process from directly mixing zirconium and zinc gels. the mixture was placed under ultrasonic irradiation for 2 hours. after the aging time and filtration of the reaction mixture, the filtrated composite gel was calcinated at 500 °c for 3h in furnace. the precursor gels of zirconium and zinc were prepared from dissol...

A polyethylene/wood-fiber composite loaded with nano-ZnO was prepared by a facile hot-press method and was used for the photocatalytic degradation of organic compounds as well as for microwave absorption. ZnO nanoparticles with an average size of 29 nm and polyethylene (PE) powders were dispersed on the wood fibers' surface through a viscous cationic polyacrylamide (CPAM) solution. The reflecti...

This research work describes the effect of dispersed titanium carbide (TiC) nanoparticles into nickel plating bath on Ni/TiC nanostructured composite layers obtained by electro-codeposition. The surface morphology of Ni/TiC nanostructured composite layers was characterized by scanning electron microscopy (SEM). The composition of coatings and the incorporation percentage of TiC nanoparticles in...

Graphene oxide (GO) was employed for the preparation of GO-zinc oxide (ZnO). The hydroxyl group on the surface was exploited to trigger the l-lactide ring-opening polymerization. A composite material with poly(l-lactide) (PLLA) chains grafted to the GO-ZnO surface, GO-ZnO-PLLA, was prepared. The results demonstrated that the employed method allowed one-step, rapid grafting of PLLA to the GO-ZnO...

This study focuses on the fabrication and electrical characterization of a polymer composite based on nano-sized varistor powder. The polymer composite was fabricated by the melt-blending method. The developed nano-composite was characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FeSEM), and energy-dispersive X-ray spect...

The potential of nanofluids for the improvement of heat transfer coefficient in various heat exchangeequipment has been considered and studied as a major application during recent decades. In this research,heat transfer coefficient of ZnO, TiO2 and ZnO/TiO2 nanofluids in a shell and tube heat exchanger has beenstudied experimentally. ZnO nanoparticle was synthesized through pre...

composite solid propellants were prepared with and without nano-alloys (ti-co, ti-ni, ti-zn), where nano-alloys used as catalyst. these nano-alloys are prepared by hydrazine reduction method. catalytic properties of these nanomaterials were measured on ammonium perchorate/hydroxyterminatedpolybutadiene propellant by thermogravimetery analysis and differential thermal analysis. both experimental...