We present results of a series of plate-impact experiments conducted to understand spall threshold in a zirconium-based bulk metallic glass (BMG), Zr41.25Ti13.75Ni10Cu12.5Be22.5, following normal shock-induced compression and combined compression-and-shear loading. The experiments were conducted using a 82.5 mm bore single-stage gas-gun. A multibeam VALYN VISAR was used to measure the particle–...

Drilling and blasting have numerous applications in the civil and mining engineering. Due to the two major components of rock masses, namely the intact rock matrix and the discontinuities, their behavior is a complicated process to be analyzed. The purpose of this work is to investigate the effects of the geomechanical and geometrical parameters of rock and discontinuities on the rock mass blas...

shear modulus and damping ratio are important input parameters in dynamic analysis. a series of resonant column tests was carried out on pure clays and sand-clay mixtures prepared at different densities to investigate the effects of aggregate content, confining stress, void ratio and clay plasticity on the maximum shear modulus and minimum damping ratio. test results revealed an increase in the...

The available shear correction factors have mainly been developed for homogeneous isotropic plates and/or assuming that no shear tractions are imposed on the top and bottom surfaces of the plate. In the present research, a more general case of a circular functionally graded plate subjected to non-uniform normal and shear tractions at the top and bottom surfaces is considered. These non-uniform ...

Vascular endothelial cells are potent modulators of vascular tone in response to shear stress. Levels of vasoactive peptides such as adrenomedullin (AM), endothelin-1 (ET-1), C-type natriuretic peptide (CNP), and nitric oxide (NO) are affected by fluid shear stress. AM, a potent vasodilator and suppressor of smooth muscle cell proliferation, contains the shear stress responsive element (SSRE) "...

This study directly measured the relative protein levels in bovine aortic endothelial cells (BAEC) that were cultured for two weeks in normal (5 mM, NG) or high (22 mM, HG) glucose and then were subjected to laminar shear stress at 0 or 15 dynes/cm(2). Membrane preparations were labeled with one of the four isobaric tagging reagents (iTRAQ), followed by LC-MS/MS analysis. The results showed tha...

Strut-and-Tie Models (STM) for the design of concrete beams, comprising of struts, ties, nodes as the basic tools, is conceptually simple, but its realization for complex concrete structure is not straightforward and depends on flow of internal forces in the structure. STM technique has won wide acceptance for deep member and shear design. STM technique is a unified approach that considers all ...

Water stress effects on winter and spring leaves anatomy were investigated in experiments conducted at the experimental field of SB University of Kerman using five wheat cultivars.Xylem and phloem elements diameter and mesophyll, bundle sheath and epidermal cells area were measured in transverse sections prepared from middle parts of the leaves. Results showed that significant difference exists...