Complex wells with high temperature and the presence of carbon dioxide hydrogen sulfide acid gas require use high-temperature high-density anti-corrosion cement slurry for cementing operations, conventional does not have advantages density, resistance, or corrosion resistance. In order to avoid severe by at temperatures, solid phase particles different particle sizes are combined polymer materi...

Cement is proven increasing the strength of soft clays. Monmorillonite has a high shrinkage. Another hand, Kaolin small Waste material usage for stabilization agent was widely carried out this decade. BAFA (bottom ash fly ash) and POFA (palm oil fuel are rich in Silica Alumina, so they used to substitute cement. The study examined effect Monmorillonite, Kaolin, on clay with Bentonite from 4% 16...

the benefits of using mineral admixtures as a partial replacement of portland cement (pc) are well established in the literature. economic and environmental advantages by reducing co2 emissions are well known. this paper examines the influence of intergrinding and separate grinding on the amount of energy consumption, blaine fineness and particle size distribution (psd) of blended cements, name...

The Phenolate Cement Zinc oxide-eugenol cements have always been regarded as the blandest in terms of their effect on the dental pulp. For this reason, these materials were commonly used as the control in biocompatibility pulp research studies on cements and restorative materials. Zinc oxide-eugenol cements have traditionally been used as temporary restoratives because of the sedative effect on...

solidified samples of fuel oil combustion bottom ash with two sets of ordinary portland cement (opc) and pozzolan added opc were investigated with three sets of chemical leaching tests. toxicity characteristic leaching test (tclp) results classified waste material and its solidification products as hazardous. although ni and cr have over-leached, but their close examination with sequential chem...

A prototype continuous wave MRI system operating at 7T has been used successfully to study a variety of heterogeneous materials exhibiting T2 relaxation values ranging from 10 micros to 50 ms. Two-dimensional images of a poly(methly methacrylate) (PMMA) resolution phantom (T2=38 micros) exhibited a spatial resolution of approximately 1mm at a magnetic field gradient strength of 200 mT/m. The te...

The binary effect of pulverized fuel ash (PFA) and palm oil fuel ash (POFA) on heat of hydration of aerated concrete was studied. Three aerated concrete mixes were prepared, namely, concrete containing 100% ordinary Portland cement (control sample or Type I), binary concrete made from 50% POFA (Type II), and ternary concrete containing 30% POFA and 20% PFA (Type III). It is found that the tempe...

Cement slurries are used for the construction of oil wells as deep as 30,000 ft (9,000 m). The severe performance requirements for such materials have prompted the search for appropriate fiber reinforcement to improve the slurry’s tensile strength, impact resistance, and fracture toughness, without decreasing its pumpability. A continuum theory for dilute suspensions of large-aspect-ratio parti...

In this study, waste ash was utilized as a pozzolanic material in blended Portland cement in order to reduce negative environmental effects and landfill volume required to dispose of waste ash. The influence of waste ash, namely palm oil fuel ash, rice husk ash and fly ash on compressive strength and sulfate resistance in mortar were studied and evaluated by some accelerated short-term techniqu...

The aim of this study was to assess the Knoop hardness of three high viscous glass ionomer cements: G1 - Ketac Molar; G2 - Ketac Molar Easymix (3M ESPE) and G3 - Magic Glass ART (Vigodent). As a parallel goal, three different methods for insertion of Ketac Molar Easymix were tested: G4 - conventional spatula; G5 - commercial syringe (Centrix) and G6 - low-cost syringe. Ten specimens of each gro...