Performance tests were carried out for a microchannel printed circuit heat exchanger (PCHE), which was fabricated with micro photo-etching and diffusion bonding technologies. The microchannel PCHE was tested for Reynolds numbers in the range of 100‒850 varying the hot-side inlet temperature between 40 °C–50 °C while keeping the cold-side temperature fixed at 20 °C. It was found that the average...

We present a novel hybrid membrane system that operates as a heat engine capable of utilizing low-grade thermal energy, which is not readily recoverable with existing technologies. The closed-loop system combines membrane distillation (MD), which generates concentrated and pure water streams by thermal separation, and pressure retarded osmosis (PRO), which converts the energy of mixing to elect...

obtaining temperature distribution data of slabs under rolling is essential as the mechanical and metallurgical properties of the metal under this process vary with temperature. using the control volume method, a mathematical model is employed in this study to predict slab temperature in the hot roll process at mobarakeh steel company. the effects of different parameters including the heat resu...

In this paper a numerical investigation is performed to study the effects of different nanofluids on convective heat transfer enhancement in a partitioned square cavity subject to different shapes of nanoparticle using water-SiO2 nanofluid. This study has been carried out to analyze the effects of SiO2 nanoparticle, its volumetric fraction between 2 and 4%, and nanoparticle shape (i.e. blades, ...

Numerical analysis of global heat transfer with coupled thermal radiation and heat conduction is investigated in Czochralski silicon crystal growth furnace with curved diffuse and specular surfaces. The ®nite element method and the radiation element method are adopted to solve the global heat transfer and the radiative heat exchange, respectively. The emphasis focuses on the discussion of the i...

basic understanding of the process of coolant heat transfer inside an engine is an indispensable prerequisite to devise an infallible cooling strategy. coolant flow and its heat transfer affect the cooling efficiency, thermal load of heated components, and thermal efficiency of a diesel engine. an efficient approach to studying cooling system for diesel engine is a 3d computational fluid dynami...

Nanofluid has great potentials in heat transfer enhancement and entropy generation decrease as an effective cooling medium. Effects of Al2O3-water nanofluid flow on entropy generation and heat transfer performance in a rectangular conventional channel are numerically investigated in this study. Four different volume fractions are considered and the boundary condition with a constant heat flux i...

The purpose of the study is to investigate average and local surface heat transfer coefficients in a cylinder packed with spheres. Here the term «local» applies to a single sphere within the bed. Averages are derived from the sixteen different spheres that were instrumented and distributed throughout the bed. The experimental technique consisted of introducing a step - wise change in the temper...

Isothermal model used in current computational fluid dynamic (CFD) model neglect the internal heat transfer during biomass devolatilization. This assumption is not reasonable for thermally-thick particles. To solve this issue, a heat transfer corrected isothermal model is introduced. In this model, two heat transfer corrected coefficients: HT-correction of heat transfer and HR-correction of rea...