Two series of polyamides and polyimides containing bulky trityl-substituted triphenylamine units were synthesized from condensation reactions of 4,4′-diamino-4′ ′-trityltriphenylamine with various dicarboxylic acids and tetracarboxylic dianhydrides, respectively. The polymers showed good solubility and film-forming ability. Flexible or robust films could be readily obtained via solution-casting...

Amide and imide based polymers are a catalogue of versatile materials that have a wide range of applications from scientific interests to commercial products because of their great thermal stability, excellent electric properties, highly mechanical strength, and superior chemical resistance (Sroog, 1976). In a thin film form, polyimides have been found to have many important uses in optoelectro...

We developed flexible LC devices using coat-debond polyimide substrates with a low birefringence and etched post spacers, and clarified that flexible LCDs using post spacers with small spacer distance have a high flexibility without degradation of the image quality. This result ensured the feasibility of flexible LCDs using coat-debond method. key words: liquid crystal display, flexible display...

We present a polymer microchip capable of monitoring neuronal activity with a fidelity never before obtained on a planar patch-clamp device. Cardio-respiratory neurons Left Pedal Dorsal 1 (LPeD1) from mollusc Lymnaea were cultured on the microchip's polyimide surface for 2 to 4 hours. Cultured neurons formed high resistance seals (gigaseals) between the cell membrane and the surface surrounding...

We proposed and experimentally demonstrated a highly sensitive salinity sensor using a polyimide-coated Hi-Bi photonic crystal fiber Sagnac interferometer based on the coating swelling induced radial pressure. This is the first time to exploit fiber coating induced pressure effect for salinity sensing. The achieved salinity sensitivity is 0.742 nm/(mol/L), which is 45 times more sensitive than ...

Glass insulated carbon-fiber microelectrodes (CFMEs) are standard tools for the measurement of neurotransmitters. However, electrodes are fabricated individually and the glass can shatter, limiting application in higher order mammals. Here, we developed a novel microelectrode batch fabrication method using a 3D-printed mold and polyimide resin insulating agent. The 3D-printed mold is low cost, ...

The effect of lowK polymer passivation on electrical leakage was investigated to evaluate the reliability of polymer integration on device wafers. Polyimide passivation over Al(0.5%Cu) interconnects inlaid in TEOS increases the intralevel leakage current mainly along the polyimide/ TEOS interface. Moisture absorbed in the polyimide, as confirmed by residual gas analysis, further increases the i...

With the aim of developing flexible biocompatible implants for in vivo studies of nerve regeneration [1], fabrication of passive polyimide membranes using the commercial available Kapton film (100HN and 50HN, from DuPont) was investigated. Polyimide has been widely used in microelectronics, and its application possibilities have been widening to other fields such as micromachining and biomedica...

Artificial retina is aimed for the stimulation of remained retinal neurons in the patient with degenerated photoreceptors. Microelectrode arrays have been developed for this as a part of stimulator. To minimize the damage during ophthalmic surgery and to get better contact to retina, flexible polyimide, which can be fabricated based on semiconductor manufacturing, was selected as the substrate ...

Directly metallized polyimide films are being widely used as advanced high-density packaging substrates. Adhesion of metal to polyimide is a key performance requirement of the film. Excellent initial adhesion and good retention after severe process steps and reliability stresses are required. In this paper, the adhesion performances of films with different types of polyimide and tie layer from ...