Transl Androl Urol, Vol 3, Suppl 1 September 2014 www.amepc.org/tau © Translational Andrology and Urology. All rights reserved. free or pedicle grafts, and venous grafting for the corpora cavernosa, injection of synthetic dermal filler. Currently, as the need for safer, effective and less-invasive procedures is increasing, enhancement procedures using injectable products are in high demand. Inj...

Bamboo flour (BF) was grafted onto lactide (LA) in the molten state using stannous octoate as a catalyst to form BF-g-LA. Then, polylactic acid (PLA) was blended with BF (PLA/BF, 85/15 wt %) to prepare PLA/BF/BF-g-LA composites using BF-g-LA as a compatibilizer. The grafting rate of BF was characterized using infrared testing and elemental analysis. To investigate the effect of BF-g-LA on the p...

Polylactic acid (PLA) has found widespread use in plastics and in biomedical applications due to its biodegradability into natural benign products. However, PLA-based materials remain limited in usefulness due to difficulty of incorporating functional groups into the polymer backbone. In this paper, we report a strategy for PLA functionalization that establishes the preparation of highly deriva...

Polylactic acid (PLA) micro/nanofiber fabrics with good biodegradability and biocompatibility have wide applications in the medical protective field. However, poor flexibility, high brittleness, insufficient mechanical properties of PLA remain challenging. Herein, a polylactic acid/polyethylene glycol (PLA/PEG) fabric aligned fibers was successfully prepared by an inexpensive straightforward po...

This work presents the experimental steps taken towards preparation of 3D printable bionanocomposites using polylactic acid (PLA) biopolymer containing 0.1, 0.5 and 1 wt% CNCs.

Additive manufacturing has attracted much attention in the last decade as a principal growing sector of complex manufacturing. Precise layer-by-layer patterning materials gives rise to novel designs and fabrication strategies that were previously not possible realize with conventional techniques. Using suitable organized variation printing settings, parts time-dependent shapes can be tuned thro...

Cinnamaldehyde (CA) was successfully encapsulated in β-cyclodextrin (β-CD), and polylactic acid (PLA)-based composite fibers were prepared by incorporating CA/β-CD via electrospinning. Morphological, structural, spectral, and antibacterial properties of different weight ratios of PLA:β-CD/CA (88:12, 94:6, 97:3, and 98.5:1.5) and PLA/CA/β-CD fibers were investigated. PLA and CA/β-CD were incorpo...

Natural fibre reinforced polylactic acid (PLA) foams, as potential green replacements for petroleum-based polymer foams, were investigated. Highly porous (ε > 95%) microcellular PLA foams were manufactured by supercritical CO2 assisted extrusion process. To overcome the inherent low melt strength of PLA, epoxyfunctionalized chain extender was applied, while talc was added to improve its crystal...

The micromechanical deformation mechanisms of a polylactic acid (PLA)/natural rubber (NR) blend (PLA/NR 90/10 wt%) and its organoclay filled bionanocomposites have been investigated by small and wide angle X-ray scattering (SAXS–WAXS) under tensile conditions. The addition of NR to a PLA matrix changed the brittle fracture of PLA to a ductile deformation through the debonding of the rubber drop...