The effect of Sn concentration on the corrosion resistance of Pb-Sn alloy in H2S04 electrolyte was investigated by potentiodynamic polarization. A new approach to calculate the exchange current density, icol'n was proposed and proved to be in accordance with the experimental results. This study shows that with the increase of alloying Sn, the corrosion rate of the alloy increased and then decre...

Corrosion resistance of pure titanium (Grade 2) and Ti−Pd alloy (Grade 7) was studied using the electrochemical techniques of potentiodynamic measurements and electrochemical impedance spectroscopy (EIS). Measurements were performed at the temperature of 36.6 °C in two solutions: PBS solution with pH of 7.4 simulating conditions of healthy human body, and PBS solution with pH of 5.2 and with th...

The protective performance of zeolite coating on AZ91D magnesium alloy was evaluated using potentiodynamic polarisation and electrochemical impedance spectroscopy (EIS) in 0.1 M sodium chloride solution (NaCl). Electrical equivalent circuit (EEC) was developed based upon hypothetical corrosion mechanisms and simulated to correspond to the experimental data. The morphology and the chemical natur...

Corrosion inhibition of mild steel in 1 M HCl and 0.5 M H2SO4 by dapsone were studied by polarization resistance, Tafel polarization, electrochemical impedance spectroscopy (EIS) and weight loss measurement. Results obtained revealed that inhibition occurs through adsorption of the drug on metal surface without modifying the mechanism of corrosion process. Potentiodynamic polarization suggested...

The corrosion inhibition of AISI309 austenitic stainless steel by 2,2'-Bipyridyl in 0.5M H 2 SO 4 at 298K was studied using the mass loss’ method, the potentiodynamic polarization (Tafel), the linear polarization (LRP) and the electrochemical impedance spectroscopy (EIS). The results showed a mixed inhibition mode and an increase in the charge transfer resistance, due to inhibitor molecules’ ad...

The localized corrosion behavior of laser surface melted 304L austenitic stainless steel was studied by potentiodynamic polarization test. The extent of improvement in corrosion resistance was governed by the preferred orientation and the percentage of delta ferrite present on the surface of the laser melted sample. It was established by orientation imaging microscopy that the highest pitting p...

--The inhibition of the corrosion of mild steel in hydrochloric acid solutions by the extract of Artemisia Herba-Alba has been studied using gravimetric and electrochemical measurement. Inhibition was found to increase with increasing concentration of the inhibitor. Values of inhibition efficiency calculated from weight loss and potentiodynamic polarization are in good agreement. This value goe...

In this study, electrochemical behaviour of passive films formed on AISI 316L stainless steel (AISI 316L) in three acidic solutions concentrations (0.3, 0.6, and 0.9M HNO3) under open circuit potential conditions were evaluated by potentiodynamic polarization, Mott–Schottky analysis and electrochemical impedance spectroscopy (EIS) techniques. The potentiodynamic polarization results showed that...