A new processing protocol based on non-halogenated solvent and additive is developed to produce polymer solar cells with power conversion efficiencies better than those processed from commonly used halogenated solvent-additive pair. Morphology studies show that good performance correlates with a finely distributed nanomorphology with a well-defined polymer fibril network structure, which leads ...

A series of benzotrithiophene-containing random terpolymers for polymer solar cells is reported. Through variations of the two other components in the terpolymers, the absorption profile and the frontier energy levels are optimized and maximum power conversion efficiencies are nearly doubled (5.14%) relative to the parent alternating copolymer.

We report a ZnO interfacial layer based on an environmentally friendly aqueous precursor for organic photovoltaics. Inverted PCDTBT devices based on this precursor show power conversion efficiencies of 6.8-7%. Unencapsulated devices stored in air display prolonged lifetimes extending over 200 hours with less than 20% drop in efficiency compared to devices based on the standard architecture.

Molybdenum sulfide (MoS(2)) and tungsten sulfide (WS(2)) are proposed as counter electrode (CE) catalysts in a I(3)(-)/I(-) and T(2)/T(-) based dye-sensitized solar cells (DSCs) system. The I(3)(-)/I(-) based DSCs using MoS(2) and WS(2) CEs achieved power conversion efficiencies of 7.59% and 7.73%, respectively.

Traditional low-molecular weight colorants that are widely applied in textile coloration, for printing purposes and nonlinear optics, now afford bulk heterojunction solar cells in combination with soluble C(60) fullerene derivative PCBM with power conversion efficiencies up to 1.7% under standard solar radiation.

Thieno[3,2-b]thienobis(silolothiophene), a new electron rich hexacyclic monomer has been synthesized and incorporated into three novel donor-acceptor low-bandgap polymers. By carefully choosing the acceptor co-monomer, the energy levels of the polymers could be modulated and high power conversion efficiencies of 5.52% were reached in OPV devices.

The optical and electrical performances of varied configurations visually attractive mosaic cubical luminescent solar concentrator photovoltaic (LSC PV) devices have been measured. These new designs LSC PV consist four lightguides containing commercially available fluorophores with edge- bottom-mounted silicon cells. 1 cm3 component PVs are made poly (methyl methacrylate) (PMMA) doped by dyes f...

Organic solar cell research has developed during the past 30 years, but especially in the last decade it has attracted scientific and economic interest triggered by a rapid increase in power conversion efficiencies. This was achieved by the introduction of new materials, improved materials engineering, and more sophisticated device structures. Today, solar power conversion efficiencies in exces...