The catalytic co-pyrolysis of a seaweed biomass, Laminaria japonica, and a typical polymer material, polypropylene, was studied for the first time. A mesoporous material Al-SBA-15 was used as a catalyst. Pyrolysis experiments were conducted using a fixed-bed reactor and pyrolysis gas chromatography/mass spectrometry (Py-GC/MS). BET surface area, N2 adsorption-desorption isotherms, and NH3 tempe...

In the present study, a mathematical model to describe the pyrolysis of a single solid particle of biomass is used to study the influence of particle size and temperature in the pyrolysis of biomass. The pyrolysis rate has been simulated by a kinetic scheme involving three reactions (primary and secondary): two parallel reactions and a third for secondary interactions between volatile and gaseo...

The effect of pyrolysis rate on the properties of alginic acid-derived carbonaceous materials, termed Starbon®, was investigated. Thermal Gravimetry-IR was used to prepare porous carbons up to 800 °C at several rates and highlighted increased CO2 production at higher pyrolysis rates. N2 porosimetry of the resultant carbons shows how pyrolysis rate affects both the mesopore structure and thus su...

Curie-point pyrolysis mass spectra were obtained from 15 methicillin-resistant and 22 methicillin-susceptible Staphylococcus aureus strains. Cluster analysis showed that the major source of variation between the pyrolysis mass spectra resulted from the phage group of the bacteria, not their resistance or susceptibility to methicillin. By contrast, artificial neural networks could be trained to ...

The aim of this study was to investigate the influence of pyrolysis temperature on the physicochemical properties and structure of biochar. Biochar was produced by fast pyrolysis of pitch pine (Pinus rigida) using a fluidized bed reactor at different pyrolysis temperatures (300, 400 and 500 °C). The produced biochars were characterized by elemental analysis, Brunauer-Emmett-Teller (BET) surface...

In this paper the possibility of using the pyrolysis oil derived from waste tyres as a collector in flotation of coal was evaluated. The pyrolysis oil was obtained at the initial and final pyrolysis temperatures of 400 and 700 C, respectively, and the heat holding time of 30 min. Flotation results indicated that the pyrolysis oil emulsion showed stronger collecting ability than diesel and the c...

Background Pyrolysis has attracted growing interest as a versatile means to convert biomass into valuable products. Wheat straw has been considered to be a promising biomass resource due to its low price and easy availability. However, most of the products obtained from wheat straw pyrolysis are usually of low quality. Hot soda extraction has the advantage of selective dissolution of lignin whi...

This paper proposes a novel energy-efficient oil shale pyrolysis process triggered by a topochemical reaction that can be applied in horizontal oil shale formations. The process starts by feeding preheated air to oil shale to initiate a topochemical reaction and the onset of self-pyrolysis. As the temperature in the virgin oil shale increases (to 250-300°C), the hot air can be replaced by ambie...

The pyrolysis of the crude glycerol from a biodiesel production plant was investigated by thermogravimetry coupled with Fourier transform infrared spectroscopy. The main gaseous products are discussed, and the thermogravimetric kinetics derived. There were four distinct phases in the pyrolysis process of the crude glycerol. The presence of water and methanol in the crude glycerol and responsibl...

The yields of char, tar, and non-condensible gases from the pyrolysis of Pinus radiata D. Don bark were measured. Pyrolysis of bark, on a small preparative scale using an airacetylene flame, gave 48% char with ash content 3.5% (mainly aluminium, calcium, potassium, and silica), and recovered tar in 7% yield (on oven-dried bark equivalent). The major components of the pyrolysis tar were catechol...