Ash sintering is an essential factor for the competitiveness of biomass gasification. Compared to conventional air gasification, gasification temperature reduced in auto thermal as utilisation compensation CaO carbonation reaction, which ultimately could suppress extent ash sintering. This work firstly investigated inhibition effect this process on simulated ashes (silica, potassium oxide and a...

STATEMENT OF PROBLEM The fabrication of zirconium dioxide (ZrO2) dental prosthetic substructures requires an extended sintering process (8 to 10 hours) in a conventional oven. Microwave sintering is a shorter process (2 hours) than conventional sintering. PURPOSE The purpose of this study was to compare the fracture toughness of 3 mol % Y2O3-stabilized ZrO2 sintered in a conventional or micro...

In one form of powder methods, the powder is compressed in a die and subsequently sintered. The final dimensions are determined by the powder, die, compaction pressure, and sintering densification cycle. The higher the compaction pressure, the higher the final density and properties. Minimal densification occurs in sintering if the powders are large and the sintering temperature is low. This is...

the purpose of this study was to investigate the deposition of the hydroxyapatite (ha) coating via the electrophoresis procedure. the ha deposition was performed in an ethanol, methanol, acetone and isopropanol suspension. methanol was found to be the best deposition media. among the different environmental conditions, including the encapsulation of the samples under two vacuum types of pressur...

Sintering models at the atomistic, particle and component scales are briefly reviewed and problems in the current generation of sintering models are highlighted. A strategy of multi-scale modelling is proposed and our progress in the multiscale modelling is reported. Mathematical details of the models are left out and the paper is set out to demonstrate what is possible in the next generation o...

Implementation of an accurate sintering model into a finite element simulation program can significantly improve Powder Metallurgy (P/M) part properties and processing efficiency. The densification and creep behavior of stainless steel powders during free sintering has been simulated and the material model has been implemented by linking user subroutines to the ABAQUS finite element code. This ...