Purpose: The aim of the study is to determine stress distribution on preloaded implant-abutment screws in three different implant systems under simulated occlusal loads. Materials and methods: Three abutments to implant internal hex joint systems were simulated by using the 3-dimensional finite element analysis; (1) Nobel Biocare replace tapered (2) Uniti (3) Lifecare self-threaded tapered ceme...

UNLABELLED This article describes a novel technique with the addition of a pressed porcelain abutment margin capable of bonding to the porcelain margin of an implant crown restoration. This allows for supragingival margin placement, reduces the potential effect of excess cement-induced peri-implant disease, and provides a controlled environment for the bonding process. Another advantage is the ...

The objective of this case report is to introduce a simple technique for simultaneously taking a closed-mouth impression and functionally generated path (FGP) for a full coverage crown restoration. A monolithic zirconia crown was the restoration of choice. An alginate impression of the abutment tooth was taken to fabricate a custom-made closed-mouth impression tray covering the abutment tooth a...

In this work, we develop and test a matchline dosimetry analysis tool (MDAT) to examine the dose distribution within the abutment region of two or more adjoining radiotherapy fields that employ different blocking mechanisms and geometries in forming a match. This objective and quantitative tool uses calibrated radiographic film to measure the dose in the abutment region, and uses a frequency di...

Leaf end abutment is seldom studied when delivering segmental intensity modulated radiation therapy (IMRT) fields. We developed an efficient leaf sequencing method to eliminate leaf end abutment for segmental IMRT delivery. Our method uses simple matrix and sorting operations to obtain a solution that simultaneously minimizes total monitor units and number of segments without leaf end abutment ...

The success rate of osseointegrated implants is reported to be above 90%. Despite of the knowledge of the mechanisms of osseointegration, some faults still occur at implants systems. Recent researches assign those faults mainly to patient’s prosthetic rehabilitation. The misfit at abutment-implant interface and the missing of a passive adaptation between the prosthesis and the abutment can lead...

Two experimental groups of abutments were prepared: (1) 4.3-mm platform width implant abutment with a 6.5-mm height (control), and (2) a 4.3-mm platform width implant abutment with a 5.5-mm height (shorter). Each abutment had 5 zirconia copings (custom designed) fabricated through a 3-dimensional computer-assisted design (3-D CAD) process by scanning an identical wax pattern. The zirconia copin...

Title of Document: EFFECTS OF WINGWALL CONFIGURATIONS ON THE BEHAVIOR OF INTEGRAL ABUTMENT BRIDGES Andreas Paraschos, Doctor of Philosophy, 2016 Dissertation Directed By: Professor Amde M. Amde Department of Civil and Environmental Engineering This research includes parametric studies performed with the use of three-dimensional nonlinear finite element models in order to investigate the effects...

504 THE JOURNAL OF PROSTHETIC DENTISTRY phase because new components must be purchased. This article describes a simple technique to limit the trapping of air bubbles in the cast-to abutments or prosthetic cylinders. This procedure reduces the risk of trapping air bubbles in the screw access holes of the abutment by directly injecting the investment into the cast-to abutment or prosthetic cylin...

This clinical report compares the esthetic outcome of replacing the same left maxillary central incisor with 2 types of implant-supported restorations, a zirconia abutment with a Procera crown and a custom metal abutment with metal ceramic crown. There were only subtle differences noted and both restorations yielded a satisfactory result.