Steel plate shear walls (SPSWs) in buildings are known to be an effective means for resisting lateral forces. By using un-stiffened walls and allowing them to buckle, their energy absorption capacity will increase significantly due to the postbuckling capacity. The post-buckling tension field action of SPSWs can provide substantial strength, stiffness and ductility. This paper presents the Fini...

the rotational friction dampers can be improved the seismic behavior of the steel structures, and they can be reduced the internal forces in the bracing members, columns and the other structural members. in this research, a simple method for modeling and analysis of braced frames equipped by these dampers is proposed. the proposed model describes seismic behavior of dampers very well and it is ...

In tall buildings the reinforced concrete (RC) shear wall is one of the predominant structural components used to resist lateral loads induced by earthquakes around the world. Previous research demonstrated that shear walls displayed a sudden loss in lateral capacity due to the wall corner and web crushing in the plastic zone. In addition, it was found that large shear distortions in shear wall...

In this paper, the superelastic shape memory alloy (SMA) slit damper system as an alternative design approach for steel structures is intended to be evaluated with respect to inelastic behavior simulated by refined finite element (FE) analyses. Although the steel slit dampers conventionally used for aseismic design are able to dissipate a considerable amount of energy generated by the plastic y...

Strengthening of the existing seismically deficient reinforced concrete (RC) buildings is an important issue in earthquake prone regions. Addition of RC shear wall as infill or external walls into the structural system has been a commonly preferred strengthening technique since the Big Erzincan Earthquake occurred in Turkey, 1992. The newly added rigid infill walls act primarily as shear walls ...

The fundamental periods of buildings are essential to calculate the design base shear and lateral forces. Most seismic codes specify empirical formulae to estimate the fundamental vibration period of buildings. These empirical formulae are used for both lowand mediumrise buildings. These formulae depend on the building materials (steel, reinforced concrete etc), building types (frame, shear wal...

ABSTRACT: The absence of explicit guidelines for the rehabilitation of existing pole structures was the motivation to investigate the effectiveness of steel jacketing for the retrofitting of self-supporting steel and reinforced concrete telecommunication poles. The present study describes a numerical simulation of preand post-retrofitted conditions of the pole structures subjected to seismic ha...

Abstract: Shear deformation is the most principal deformation in the lateral deformation of shear wall built with precast hollow slab which is designed to be strong shearing and weak bending. The special mechanical characteristic of the shear wall is the relative deformation of the concrete on both sides of vertical and inner joint respectively. The study introduces the measuring scheme of shea...

In Italy as well in other earthquake-prone countries, the large number of existing buildings requiring seismic retrofitting calls for sustainable solutions able to reduce both costs and downtime. To this purpose, paper, High-Performance Dissipating Frame system (HPDF), a new strengthening solution rehabilitation buildings, is presented. HPDF based on external precast reinforced concrete (RC) fr...

The steel frame reinforced with steel shear wall is a lateral load resisting system and has higher strength and shear performance than the concrete shear wall system. Especially, using corrugated steel plates in these shear wall systems improves out-of-plane stiffness and flexibility in the deformation along the corrugation. In this paper, a cyclic loading test of this steel frame reinforced wi...