The present study explains a steady-state method of measuring convective heat transfer coefficient on the casing of an axial flow turbine. The goal is to develop an accurate steadystate heat transfer method for the comparison of various casing surface and tip designs used for turbine performance improvements. The free-stream reference temperature, especially in the tip gap region of the casing ...

The design of an optimised horizontal axis 5-meterlong wind turbine rotor blade in according with IEC 61400-2 standard is a research and development project in order to fulfil the requirements of high efficiency of torque from wind production and to optimise the structural components to the lightest and strongest way possible. For this purpose, a research study is presented here by focusing on ...

An aeroelastic analysis based on finite elements in space and time is used to model the helicopter rotor in forward flight. The rotor blade is represented as an elastic cantilever beam undergoing flap and lag bending, elastic torsion and axial deformations. The objective of the improved design is to reduce vibratory loads at the rotor hub that are the main source of helicopter vibration. Constr...

Accurate simulations of the aerodynamic performance of vertical-axis wind turbines pose a significant challenge for computational fluid dynamics methods. The aerodynamic interaction between the blades of the rotor and the wake that is produced by the blades requires a high-fidelity representation of the convection of vorticity within the wake. In addition, the cyclicmotion of the blades induces...

This paper describes a new method for computing the flowfield and acoustic signature of arbitrary rotors in forward flight. The overall scheme uses a finite-difference Navier-Stokes solver to compute the aerodynamic flowfield near the rotor blades. The equations are solved on a system of overset grids that allow for prescribed cyclic and flapping blade motions and capture the interactions betwe...

Low-speed wind energy conversion systems generally use Carbon Fiber Reinforced Plastic (CFRP) and Glass Fiber Reinforced Plastic (GFRP) as materials for rotor blade because these materials are light weight and hard but expensive. Layer Laminated Bamboo Composite (LLBC) is a bio-composite with bamboo base material which is abundant material and has a relatively lower price. This study investigat...

This paper presents a methodology for numerical simulations of super-cooled three-dimensional (3-D) water droplet trajectories through aeroengine rotating machinery that includes the effect of energy exchange between the droplets and flow. The governing equations for both flow and droplets are formulated and solved within the reference frame of rotating blades. A Eulerian-Lagrangian approach is...

The use of a shroud around the rotor of a wind turbine has been known to augment the airflow through the rotor plane and hence result in improved performance. This work uses Computational Fluid Dynamics (CFD) to assess the validity of several simple theories which attempt to extend Betz theory to shrouded turbines. Two CFD models are employed and compared to predictions of previously published ...

In this multidisciplinary study a geared open rotor configuration is assessed and compared to an ultra high bypass ratio geared turbofan engine. Both designs assume a 2020 entry into service level of technology. The specific thrust level for minimizing block fuel and the resulting engine emissions for a given mission is sought. The tool used contains models that effectively capture: engine perf...

In recent years, individual pitch control has been developed for wind turbines, with the purpose of reducing blade and tower loads. Such algorithms depend on reliable sensor information. The azimuth angle sensor, which positions the wind turbine rotor in its rotation, is quite important. This sensor has to be correct as blade pitch actions should be different at different azimuth angle as the w...